Setup Alerting and Notification for the E-Series System CERTIFIED-IMPLEMENTATION-ENGINEER-SAN-E-SERIES Practice Questions (Page 2)

Questions 6–10

1. 6expert · hard

   A data center operator manages multiple E-Series systems. The NOC uses SNMPv2c for monitoring, but the security team has mandated a migration to SNMPv3 for all new configurations. The operator is configuring a new E-Series system and needs to send traps to the NOC. The NOC's SNMP manager currently only supports SNMPv2c. What should the operator do to ensure traps are received while planning for the migration?

   • AConfigure SNMPv2c traps with a strong community string for now, and plan to switch to SNMPv3 once the NOC manager supports it.
   • BUse syslog forwarding instead of SNMP traps to avoid the version compatibility issue.
   • CConfigure both SNMPv2c and SNMPv3 traps simultaneously to the same destination.
   • DConfigure SNMPv3 traps now, even though the NOC manager does not support it, to comply with the security mandate.
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   After configuring email alerts on an E-Series system, what is the recommended way to verify that the configuration is working correctly?

   • AGenerate a test alert and confirm the email is received
   • BRestart the storage system and observe the boot messages
   • CCheck the SNMP trap log on the management station
   • DReview the syslog server for new entries
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   Which of the following are alerting methods supported by NetApp E-Series storage systems for notifying administrators of system events?

   • ASNMP traps, syslog forwarding, and HTTP webhooks
   • BEmail, SMS text messaging, and SNMP traps
   • CSyslog forwarding, email, and FTP file transfer
   • DEmail, SNMP traps, and syslog forwarding
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   When configuring email alerts on an E-Series system, which of the following settings is required to allow the system to send emails?

   • ASNMP community string
   • BSMTP server address
   • CSyslog server port
   • DAlert severity threshold
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   A university research lab runs an E-Series system for high-performance computing. The lab's security team requires all system events to be forwarded to a central syslog server for long-term archival and analysis. The syslog server is on a different subnet and listens on UDP port 514. What should the admin configure in SANtricity System Manager?

   • AEnable syslog forwarding and set the destination to the default gateway to ensure the events are routed correctly.
   • BEnable syslog forwarding, enter the syslog server's IP address and port 514, and select the desired event severity levels to forward.
   • CSet up email alerts to the security team's distribution list and attach the syslog server as a secondary recipient.
   • DConfigure SNMP traps to the syslog server's IP address and set the community string to 'public'.
   Reveal Solution Discussion Select an answer first