Order of Operation Considerations JN0-750 Practice Questions (Page 3)

Questions 11–14

1. 11expert · hard

   A network admin is automating the deployment of a new branch. The branch has a Mist switch and two APs. The admin's script performs the following steps in order: 1) Create site, 2) Adopt switch, 3) Adopt APs, 4) Assign switch template to site, 5) Assign WLAN template to site. The admin finds that the switch is not receiving its configuration. What is the most likely reason?

   • AThe APs were adopted before the WLAN template was assigned.
   • BThe switch template was assigned after the switch was adopted, so the switch did not pick it up.
   • CThe switch needs to be rebooted to fetch the configuration.
   • DThe switch was adopted before the site was created.
   Reveal Solution Discussion Select an answer first
2. 12foundation · easy

   Why is it a best practice to perform validation as the final step in a Day 1 automation workflow?

   • ATo prepare the device for adoption
   • BTo automatically correct any configuration errors
   • CTo reduce the time required for configuration
   • DTo ensure that the configuration was applied correctly and the device is operating as expected
   Reveal Solution Discussion Select an answer first
4. 13foundation · easy

   What is a potential consequence of applying configuration to a device before it has been adopted in Mist?

   • AThe device will automatically adopt itself after receiving the configuration
   • BThe device will be removed from the organization
   • CThe configuration may not be applied because Mist cannot manage an unadopted device
   • DThe configuration will be applied but validation will be skipped
   Reveal Solution Discussion Select an answer first
5. 14application · medium

   A network engineer is deploying 200 EX switches in a new campus. The switches are racked and cabled, but none have been adopted into Mist. The engineer has already created the Site, WLAN templates, and switch templates in the Mist portal. Which sequence should the engineer follow to bring the switches under management and push the intended configuration?

   • APre-provision the switches by importing the MAC addresses, then adopt them after the network is fully operational.
   • BAdopt the switches into Mist, assign them to the site, then let the templates apply during the next config push.
   • CAdopt the switches, but do not assign them to a site until after the first config push succeeds.
   • DApply the switch templates to the site first, then adopt the switches so they inherit the configuration immediately.
   Reveal Solution Discussion Select an answer first