Order of Operation Considerations JN0-750 Practice Questions (Page 2)

Questions 6–10

1. 6expert · hard

   A network team is automating the deployment of a new site with a mix of Mist switches and APs. They have a script that: 1) Creates the site, 2) Adopts the switches, 3) Adopts the APs, 4) Assigns the switch template to the site, 5) Assigns the WLAN template to the site. The team notices that the switches are not receiving their configuration. What is the most likely reason?

   • AThe switches were adopted before the site was created.
   • BThe APs were adopted before the WLAN template was assigned.
   • CThe switches need to be rebooted to fetch the configuration.
   • DThe switch template was assigned after the switches were adopted, so the switches did not pick it up.
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   A network admin is automating the deployment of a new remote office. The office has a single Mist AP and a single Mist switch. The admin wants to ensure that the AP can reach the internet and the corporate network. What is the correct order of operations for the initial deployment?

   • AConfigure the AP's SSID first, then adopt the switch to provide the backhaul.
   • BAdopt the switch, configure the switch's uplink and VLANs, then adopt the AP.
   • CAdopt the AP first, then the switch, so the AP can be managed immediately.
   • DAdopt both devices simultaneously and let Mist auto-configure the network.
   Reveal Solution Discussion Select an answer first
4. 8application · medium

   A company is deploying a new branch with a Mist switch and two APs. The network engineer wants to ensure that the APs can reach the internet and the corporate network. The engineer has already created the site and the WLAN template. What is the next step in the correct order of operations?

   • AAssign the WLAN template to the site.
   • BAdopt the switch and configure its uplink and VLANs.
   • CReboot the switch to ensure it is running the latest firmware.
   • DAdopt the APs and assign them to the site.
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   A company is deploying a new site with a Mist switch and a few APs. The network engineer has created the site and the switch template. The engineer is now ready to onboard the devices. What is the correct order of operations?

   • AAdopt the APs first, then the switch, so the APs can be managed immediately.
   • BAdopt the switch, then adopt the APs, and finally assign the switch template to the site.
   • CAdopt the switch, assign the switch template to the site, then adopt the APs.
   • DAssign the switch template to the site, then adopt the switch and APs simultaneously.
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   In a Mist automation workflow, what is the dependency between configuration and validation?

   • AValidation must be performed after configuration to confirm the configuration is correctly applied
   • BConfiguration must be performed after validation to ensure the device is ready
   • CConfiguration is a prerequisite for adoption, and validation is a prerequisite for configuration
   • DValidation and configuration are independent and can be performed in any order
   Reveal Solution Discussion Select an answer first