A network administrator needs to monitor the state of BGP sessions. They want to be notified immediately when a session goes down, but they do not need continuous data about the session state. Which telemetry type is most appropriate?

Periodic telemetry with a 30-second interval

Periodic telemetry with a 1-second interval

Event-driven telemetry that sends a notification when the BGP session state changes

On-change telemetry that sends the BGP session state whenever it changes

A company is implementing streaming telemetry to replace SNMP polling. They need a solution that supports secure, bidirectional communication and uses a modern, efficient encoding format. Which combination of protocols should they choose?

gRPC with Protocol Buffers (protobuf) encoding

In Junos telemetry configuration, what is the purpose of defining a sensor?

It configures the authentication method for the telemetry collector.

It specifies which data points to collect and how often to collect them.

It defines the destination IP address and port for sending telemetry data.

It enables or disables the telemetry feature on the device.

A network engineer notices that telemetry data from a Junos device is missing for certain sensors, but other sensors are working fine. The export profile and destination are correctly configured. What is the most likely cause?

The export profile is not applied to the sensor

The sensor definitions are incorrect or not supported on this platform

Juniper NetworksCertified Professional, Data Center (JNCIP-DC)

Domain 1Objective 3

Monitoring and Analytics (telemetry) JN0-683 Practice Questions (Page 2)

Part of the Data Center Deployment and Management domain, which makes up ~11% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–2 from this objective — we provide 25 practice questions to prepare you well beyond it. (estimate)

25questions here

5free pages

7concepts

Questions 6–10

6application · medium
A network administrator needs to monitor the state of BGP sessions. They want to be notified immediately when a session goes down, but they do not need continuous data about the session state. Which telemetry type is most appropriate?
Select an answer first
7application · medium
A company is implementing streaming telemetry to replace SNMP polling. They need a solution that supports secure, bidirectional communication and uses a modern, efficient encoding format. Which combination of protocols should they choose?
Select an answer first
8expert · hard
A data center team is using Grafana to visualize telemetry data. They have a dashboard that shows interface utilization for all devices. They want to add a feature that allows them to click on a data point to see the raw telemetry data for that specific time. Which Grafana feature should they use?
Select an answer first
9foundation · easy
In Junos telemetry configuration, what is the purpose of defining a sensor?
Select an answer first
10application · medium
A network engineer notices that telemetry data from a Junos device is missing for certain sensors, but other sensors are working fine. The export profile and destination are correctly configured. What is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-683

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.