Juniper NetworksCertified Professional, Data Center (JNCIP-DC)
Domain 5Objective 5
Configure, Monitor, or Troubleshoot DCI JN0-683 Practice Questions (Page 1)
Part of the Data Center Interconnect domain, which makes up ~20% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–12 in this domain), expect 1–2 from this objective — we provide 11 practice questions to prepare you well beyond it. (estimate)
11questions here
3free pages
3concepts
Questions 1–5
- 1
When troubleshooting an EVPN-VXLAN DCI, which command would you use to verify that the BGP EVPN address family is configured and active on a Juniper device?
Select an answer first - 2
Which Junos operational command would you use to verify the operational state of VXLAN tunnels, including the source and destination IP addresses of each tunnel?
Select an answer first - 3
You are troubleshooting an EVPN-VXLAN DCI where inter-site traffic is failing. The underlay is healthy, and the BGP sessions are established. You notice that the 'show evpn instance' command shows the EVPN instance is up, but the 'show route table evpn.0' command shows no routes. You have verified that the EVPN address family is enabled on the BGP session. What is the most likely cause?
Select an answer first - 4
You are configuring a new EVPN-VXLAN DCI between two sites. The underlay is a single OSPF area, and the overlay uses MP-BGP with EVPN address family. Both sites have the same AS number. You have configured the BGP groups and the EVPN signaling, but the VTEPs are not learning remote MAC addresses. What is the most likely cause?
Select an answer first - 5
You are monitoring an EVPN-VXLAN DCI and notice that some MAC addresses are not being learned across sites. You want to verify whether the local VTEP is receiving the EVPN routes from the remote site. Which command would provide the most direct evidence?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.