Juniper NetworksCertified Professional, Service Provider Routing and Switching (JNCIP-SP)
Domain 4Objective 4
Policers and Schedulers JN0-664 Practice Questions (Page 7)
Part of the Class of Service (CoS) domain, which makes up ~16% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–10 in this domain), expect 1–1 from this objective — we provide 33 practice questions to prepare you well beyond it. (estimate)
33questions here
7free pages
14concepts
Questions 31–33
- 31
What is the purpose of a drop profile in Junos CoS?
Select an answer first - 32
A network engineer is configuring a policer on a Juniper router to limit FTP traffic to 50 Mbps. The engineer wants to mark traffic that exceeds the rate with a high loss priority so that it can be dropped first during congestion, but still forward it. Which action should be configured for the exceeding traffic in the policer?
Select an answer first - 33
A service provider wants to enforce a committed rate of 20 Mbps for a subscriber, but allow bursts of up to 30 Mbps for short periods. Traffic that exceeds the committed burst size but is within the excess burst size should be marked with a low loss priority. Traffic above the excess burst size should be discarded. Which policer type should be used?
Select an answer first
Finished these 3 questions?
Review the revealed explanations, or continue through the curriculum.
No more pagesBack to JN0-664
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-664” is a trademark of its owner, used for identification only.