What is the purpose of BGP multihop?

To enable load balancing across multiple equal-cost paths

To allow BGP sessions between peers that are not directly connected

To reduce the number of IBGP sessions in a full mesh

What is the primary role of a BGP route reflector?

To enable load balancing across multiple paths

To reduce the number of IBGP sessions required in a full mesh

To allow sessions between non-directly connected peers

A service provider is scaling its IBGP network by introducing route reflectors. The provider has two route reflectors in the same cluster to provide redundancy. What must be configured to ensure that the route reflectors do not reflect routes to each other, preventing routing loops?

Configure the route reflectors as clients of each other.

Configure the 'no-client-reflect' statement on both route reflectors.

Configure different cluster IDs on each route reflector.

Configure the same cluster ID on both route reflectors.

What is the purpose of BGP route damping?

To suppress unstable routes that flap

To enable load balancing across multiple paths

To reduce the number of IBGP sessions in a full mesh

To allow sessions between non-directly connected peers

Which Junos configuration statement enables BGP multipath for all BGP peers?

set protocols bgp cluster-id 1.1.1.1

Juniper NetworksCertified Professional, Service Provider Routing and Switching (JNCIP-SP)

Domain 3Objective 2

BGP Scalability and Performance JN0-664 Practice Questions (Page 2)

Part of the BGP domain, which makes up ~6% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~2–4 in this domain), expect 1–1 from this objective — we provide 13 practice questions to prepare you well beyond it. (estimate)

13questions here

3free pages

6concepts

Questions 6–10

6foundation · easy
What is the purpose of BGP multihop?
Select an answer first
7foundation · easy
What is the primary role of a BGP route reflector?
Select an answer first
8application · medium
A service provider is scaling its IBGP network by introducing route reflectors. The provider has two route reflectors in the same cluster to provide redundancy. What must be configured to ensure that the route reflectors do not reflect routes to each other, preventing routing loops?
Select an answer first
9foundation · easy
What is the purpose of BGP route damping?
Select an answer first
10foundation · easy
Which Junos configuration statement enables BGP multipath for all BGP peers?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-664

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-664” is a trademark of its owner, used for identification only.