Dynamic VLAN Registration Using MVRP JN0-650 Practice Questions (Page 5)

Questions 21–24

1. 21foundation · easy

   How does MVRP handle VLAN registration on a port that is in the STP blocking state?

   • AMVRP does not send or receive messages on the port until it transitions to a forwarding state.
   • BMVRP ignores the STP state and processes messages normally.
   • CMVRP still sends and receives messages on the port to maintain registration.
   • DMVRP forces the port to forwarding state to allow VLAN registration.
   Reveal Solution Discussion Select an answer first
2. 22foundation · easy

   Which MVRP message type is used to indicate that a switch wants to register a VLAN on a port?

   • AEmpty
   • BLeaveAll
   • CLeave
   • DJoin
   Reveal Solution Discussion Select an answer first
4. 23foundation · easy

   What is the default state of MVRP on Juniper switches?

   • ADisabled globally and on all interfaces.
   • BEnabled globally and on all interfaces.
   • CEnabled globally but disabled on all interfaces.
   • DEnabled only on trunk interfaces.
   Reveal Solution Discussion Select an answer first
5. 24expert · hard

   A network administrator is designing a network with MVRP to automatically manage VLANs. The network has multiple switches connected in a ring topology. The administrator wants to ensure that VLAN registrations are propagated across the entire network without loops. What must be considered?

   • AMVRP alone can prevent loops by not forwarding messages on redundant links.
   • BMVRP must be used in conjunction with STP to prevent loops in the ring topology.
   • CMVRP must be disabled on the ring links to prevent loops.
   • DMVRP requires a dedicated root bridge to manage registrations in a ring.
   Reveal Solution Discussion Select an answer first