Transparent Mode JN0-637 Practice Questions (Page 3)

Questions 11–13

1. 11foundation · easy

   What is a key consideration when implementing chassis clustering in transparent mode?

   • ABoth nodes must be connected to the same Layer 2 network to ensure seamless failover.
   • BThe cluster requires a dedicated link between nodes for all data traffic.
   • CThe cluster must use a virtual IP address for all traffic forwarding.
   • DEach node must have a unique IP address on the same subnet as the hosts.
   Reveal Solution Discussion Select an answer first
2. 12foundation · easy

   What is the role of MAC address learning in transparent mode?

   • ATo filter frames based on the source MAC address.
   • BTo determine the security zone for incoming frames.
   • CTo assign IP addresses to hosts based on their MAC address.
   • DTo build a forwarding table that maps MAC addresses to interfaces.
   Reveal Solution Discussion Select an answer first
3. 13foundation · easy

   When configuring interfaces for transparent mode, what must be done to allow traffic from multiple VLANs to be inspected?

   • AConfigure the interfaces as trunk ports and assign the allowed VLANs to the security zones.
   • BAssign a separate IP address to each VLAN interface.
   • CCreate a VLAN interface for each VLAN and assign it to a security zone.
   • DEnable routing between the VLANs using a routing protocol.
   Reveal Solution Discussion Select an answer first