What is the role of a VTEP when receiving a VXLAN packet from the underlay network?

To remove the VXLAN header and forward the inner frame to the local VLAN

To add a VXLAN header and forward the packet to the destination host

To update the VNI to a new value before forwarding

To route the packet to the destination subnet

In an ERB EVPN-VXLAN deployment, which EVPN route type is used to advertise IP prefixes for inter-subnet routing?

Type 3 (Inclusive Multicast) route

Type 2 (MAC/IP Advertisement) route

Type 1 (Ethernet Auto-Discovery) route

Which of the following is a core function of a VTEP in a VXLAN network?

Performing routing between VNIs

Assigning IP addresses to hosts

Encapsulating and decapsulating VXLAN packets

Filtering traffic based on application layer

Which VXLAN control plane option replicates BUM traffic to all remote VTEPs by sending unicast copies from the source VTEP?

Head-end replication control plane

Ingress replication control plane

In an ERB EVPN-VXLAN design, what is the primary purpose of advertising EVPN Type 2 routes?

To signal multicast groups for BUM traffic

To enable MAC and IP address learning across the overlay

To advertise IP prefixes for inter-subnet routing

To establish VXLAN tunnels between VTEPs

Juniper NetworksCertified Specialist, Data Center (JNCIS-DC)

Domain 1Objective 3

VXLAN Data Plane and Overlay JN0-481 Practice Questions (Page 1)

Part of the Data Center Architectures (IP Fabrics, EVPN-VXLAN) domain, which makes up ~5% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~2–3 in this domain), expect 1–1 from this objective — we provide 12 practice questions to prepare you well beyond it. (estimate)

12questions here

3free pages

5concepts

Questions 1–5

1foundation · easy
What is the role of a VTEP when receiving a VXLAN packet from the underlay network?
Select an answer first
2foundation · easy
In an ERB EVPN-VXLAN deployment, which EVPN route type is used to advertise IP prefixes for inter-subnet routing?
Select an answer first
3foundation · easy
Which of the following is a core function of a VTEP in a VXLAN network?
Select an answer first
4foundation · easy
Which VXLAN control plane option replicates BUM traffic to all remote VTEPs by sending unicast copies from the source VTEP?
Select an answer first
5foundation · easy
In an ERB EVPN-VXLAN design, what is the primary purpose of advertising EVPN Type 2 routes?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-481

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-481” is a trademark of its owner, used for identification only.