A managed service provider is using connectivity templates to provision network services for multiple tenants on a single QFX5120 switch. A new tenant requires a unique VLAN (VLAN 300) and a routing instance. The provider wants to ensure that the new tenant's services are provisioned quickly and consistently with other tenants. What should the administrator do?

Modify an existing template to add VLAN 300 and apply it to the new tenant.

Create a new connectivity template with VLAN 300 and the routing instance, then apply it to the new tenant's logical system.

Use the same template as another tenant and change the VLAN ID in the tenant's configuration.

Manually configure VLAN 300 and the routing instance on the switch and associate them with the tenant.

In a connectivity template, what is the role of VLANs?

To route traffic between different tenants

To assign IP addresses to tenant devices automatically

To provide Layer 2 segmentation within a tenant's network

To encrypt traffic between tenant sites

When configuring a connectivity template on a Junos device, what is a typical step?

Creating a new routing protocol specifically for the template

Rebooting the device to apply the template

Defining the template name and its associated network components

Assigning a serial number to the template

When modifying an existing connectivity template, what must be considered?

The change will only affect new tenants, not existing ones

The template must be deleted and recreated from scratch

The change will affect all tenants that have the template applied

The device must be rebooted for the change to take effect

Juniper NetworksCertified Specialist, Data Center (JNCIS-DC)

Domain 6Objective 1

Connectivity Templates JN0-481 Practice Questions (Page 5)

Part of the Data Center Multitenancy domain, which makes up ~20% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–12 in this domain), expect 1–2 from this objective — we provide 25 practice questions to prepare you well beyond it. (estimate)

25questions here

5free pages

6concepts

Questions 21–25

21application · medium
A managed service provider is using connectivity templates to provision network services for multiple tenants on a single QFX5120 switch. A new tenant requires a unique VLAN (VLAN 300) and a routing instance. The provider wants to ensure that the new tenant's services are provisioned quickly and consistently with other tenants. What should the administrator do?
Select an answer first
22foundation · easy
In a connectivity template, what is the role of VLANs?
Select an answer first
23foundation · easy
Which Junos command can be used to validate a connectivity template configuration?
Select an answer first
24foundation · easy
When configuring a connectivity template on a Junos device, what is a typical step?
Select an answer first
25foundation · easy
When modifying an existing connectivity template, what must be considered?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to JN0-481

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-481” is a trademark of its owner, used for identification only.

Connectivity Templates JN0-481 Practice Questions (Page 5)

Questions 21–25

In a connectivity template, what is the role of VLANs?

Which Junos command can be used to validate a connectivity template configuration?

When configuring a connectivity template on a Junos device, what is a typical step?

When modifying an existing connectivity template, what must be considered?

Keep studying — Data Center Multitenancy