A switch's agent is reporting telemetry, but the data is incomplete (e.g., missing interface counters). The agent is running and the network is stable. What is the most likely cause?

The agent's telemetry subscription is not configured for all required data

The switch's SNMP community string is wrong

The Apstra server is out of disk space

A network engineer is troubleshooting why telemetry data from a managed switch is not updating in the Apstra UI. The switch is reachable and the agent is running. What is the most likely cause?

The agent is using the wrong telemetry port

The switch's SNMP community string is incorrect

The agent's communication channel to the Apstra server is blocked

The switch's management interface is down

Which statement accurately describes the purpose of Apstra device agents?

They are required only for Juniper devices and are not used for third-party hardware

They replace the need for any network management protocols on the device

They are only used for monitoring and do not apply configuration changes

They enable Apstra to manage devices that do not natively support Apstra's required interfaces

A switch's agent is not communicating with the Apstra server. The administrator has verified the agent is running and the network path is clear. What should they check next?

The Apstra server's DNS settings

The agent's configured server address and port

Juniper NetworksCertified Specialist, Data Center (JNCIS-DC)

Domain 2Objective 2

Apstra Device Agents JN0-481 Practice Questions (Page 3)

Part of the Juniper Apstra Architecture domain, which makes up ~18% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–11 in this domain), expect 1–2 from this objective — we provide 26 practice questions to prepare you well beyond it. (estimate)

26questions here

6free pages

6concepts

Questions 11–15

11foundation · easy
Which protocol is commonly used by Apstra device agents to report telemetry data to the Apstra server?
Select an answer first
12expert · hard
A switch's agent is reporting telemetry, but the data is incomplete (e.g., missing interface counters). The agent is running and the network is stable. What is the most likely cause?
Select an answer first
13application · medium
A network engineer is troubleshooting why telemetry data from a managed switch is not updating in the Apstra UI. The switch is reachable and the agent is running. What is the most likely cause?
Select an answer first
14foundation · easy
Which statement accurately describes the purpose of Apstra device agents?
Select an answer first
15application · medium
A switch's agent is not communicating with the Apstra server. The administrator has verified the agent is running and the network path is clear. What should they check next?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-481

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-481” is a trademark of its owner, used for identification only.