Why would you associate a switch with a site and map in Mist?

To enable location-based features and visual placement on a floor plan

To enable PoE on the switch ports

To increase the switch's forwarding capacity

After deploying a new switch and onboarding it into the Mist cloud, an administrator notices that the switch is not appearing in the Mist portal as 'Connected'. The switch has been powered on and has network connectivity. What should the administrator check first to validate the deployment?

Reboot the switch to force it to re-attempt onboarding.

Check the switch's VLAN configuration to ensure it is on the correct VLAN.

Check the switch's configuration to ensure it has the correct hostname and management IP.

Verify that the switch can reach the Mist cloud by checking the switch's connectivity to the Mist cloud URL.

Which of the following is a typical check performed during deployment validation?

Verifying that the switch is connected to the Mist cloud

Measuring the physical temperature of the switch

Counting the number of ports on the switch

Reviewing the switch's purchase order

A company wants to use Mist's location-based services to track assets in their warehouse. They have deployed Juniper EX switches and want to associate them with the warehouse floor plan. What must the administrator do to enable location-based features for the switches?

Configure the switches with a static location using GPS coordinates in the CLI.

Enable LLDP-MED on the switches to broadcast their location to the Mist cloud.

Create a switch group for the warehouse and enable location-based services on the group.

Associate the switches with a site and then map them to the floor plan in the Mist portal.

Juniper NetworksCertified Specialist, Mist AI Wired (JNCIS-MistAI)

Domain 2Objective 8

Provision or Deploy Wired Assurance JN0-460 Practice Questions (Page 5)

Part of the Wired Assurance Provisioning or Deployment domain, which makes up ~27% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–16 in this domain), expect 1–2 from this objective — we provide 24 practice questions to prepare you well beyond it. (estimate)

24questions here

5free pages

7concepts

Questions 21–24

21foundation · easy
Why would you associate a switch with a site and map in Mist?
Select an answer first
22application · medium
After deploying a new switch and onboarding it into the Mist cloud, an administrator notices that the switch is not appearing in the Mist portal as 'Connected'. The switch has been powered on and has network connectivity. What should the administrator check first to validate the deployment?
Select an answer first
23foundation · easy
Which of the following is a typical check performed during deployment validation?
Select an answer first
24application · medium
A company wants to use Mist's location-based services to track assets in their warehouse. They have deployed Juniper EX switches and want to associate them with the warehouse floor plan. What must the administrator do to enable location-based features for the switches?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to JN0-460

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-460” is a trademark of its owner, used for identification only.