What type of data can be viewed in the Mist switch monitoring dashboard?

Switch CPU and memory utilization

Application-layer traffic analysis

A company is deploying new IP phones and wants to ensure they receive the correct VLAN automatically. The phones are connected to access ports that also serve PCs. The admin needs to configure the switch ports so that the phones are on the voice VLAN and PCs are on the data VLAN. What should the admin do?

Configure the port as a trunk and allow both voice and data VLANs, letting the devices choose via VLAN tags.

Use a port profile that assigns the voice VLAN as the native VLAN and the data VLAN as the access VLAN.

Create a port profile that sets the access VLAN to the data VLAN and enables LLDP-MED to advertise the voice VLAN.

Set the access VLAN to the voice VLAN and rely on the PC to use DHCP to get the data VLAN.

When a configuration template is updated, what happens to the switches that are using it?

The changes are only applied after a reboot of each switch

The switches must be manually updated one by one

The changes are automatically pushed to all switches assigned to the template

The switches are removed from the template and must be re-added

An organization has a mix of switch models, some of which are end-of-life and cannot run the latest firmware. The admin needs to ensure all switches are compliant with the organization's security policy, which requires the latest firmware for supported models. What should the admin do?

Keep all switches on the current firmware to maintain consistency.

Use Mist's firmware compliance report and ignore end-of-life models.

Upgrade all switches to the latest firmware, including end-of-life models.

Upgrade supported models to the latest firmware and plan to replace end-of-life models.

A network admin is onboarding a new switch that was previously used in another organization. The switch still has the old Mist configuration. The admin wants to adopt it into the current organization with a clean configuration. What should the admin do first?

Connect the switch to the network and let ZTP handle the adoption.

Add the switch's serial number to the current organization and claim it.

Factory reset the switch to clear the old configuration before onboarding.

Use the Mist portal to overwrite the configuration during adoption.

Juniper NetworksCertified Specialist, Mist AI Wired (JNCIS-MistAI)

Domain 3Objective 1

Managing Switches JN0-460 Practice Questions (Page 6)

Part of the Wired Assurance Management or Operations domain, which makes up ~24% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~8–14 in this domain), expect 1–2 from this objective — we provide 31 practice questions to prepare you well beyond it. (estimate)

31questions here

7free pages

8concepts

Questions 26–30

26foundation · easy
What type of data can be viewed in the Mist switch monitoring dashboard?
Select an answer first
27application · medium
A company is deploying new IP phones and wants to ensure they receive the correct VLAN automatically. The phones are connected to access ports that also serve PCs. The admin needs to configure the switch ports so that the phones are on the voice VLAN and PCs are on the data VLAN. What should the admin do?
Select an answer first
28foundation · easy
When a configuration template is updated, what happens to the switches that are using it?
Select an answer first
29expert · hard
An organization has a mix of switch models, some of which are end-of-life and cannot run the latest firmware. The admin needs to ensure all switches are compliant with the organization's security policy, which requires the latest firmware for supported models. What should the admin do?
Select an answer first
30application · medium
A network admin is onboarding a new switch that was previously used in another organization. The switch still has the old Mist configuration. The admin wants to adopt it into the current organization with a clean configuration. What should the admin do first?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-460

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-460” is a trademark of its owner, used for identification only.