Where can an administrator find detailed logs for a specific switch to troubleshoot an issue?

In the switch's detail page under the 'Logs' tab

What initial configuration is typically required on a switch before it can be adopted into Mist?

An admin password and a hostname

A VLAN configuration and a port profile

A management IP address and the Mist cloud address

A static route to the Mist cloud and a DNS server

What is the purpose of a trunk port in VLAN management?

To provide power to connected devices

To carry traffic for multiple VLANs between switches

To connect a single device to the network

To monitor network traffic on a specific VLAN

An admin is configuring ports for a conference room that will host both wired and wireless devices. The room has a mix of laptops, IP cameras, and a VoIP phone. The admin wants to ensure that each device type gets the appropriate VLAN and that the ports are secure. What is the best way to configure the ports using port profiles?

Create separate port profiles for each device type and assign them to the respective ports.

Use a single port profile with the native VLAN set to the management VLAN.

Create a single port profile that allows all VLANs and enables 802.1X authentication.

Configure all ports as trunk ports and let the devices tag their own VLANs.

A network admin is monitoring switch performance and notices that a particular switch is experiencing high error rates on a specific interface. The admin wants to determine if this is a physical issue or a configuration issue. What should the admin do?

Review the switch's configuration for speed and duplex mismatches.

Check the switch's firmware version for known issues.

Check the interface statistics in Mist for CRC errors and collisions.

Reboot the switch to clear the error counters.

Juniper NetworksCertified Specialist, Mist AI Wired (JNCIS-MistAI)

Domain 3Objective 1

Managing Switches JN0-460 Practice Questions (Page 2)

Part of the Wired Assurance Management or Operations domain, which makes up ~24% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~8–14 in this domain), expect 1–2 from this objective — we provide 31 practice questions to prepare you well beyond it. (estimate)

31questions here

7free pages

8concepts

Questions 6–10

6foundation · easy
Where can an administrator find detailed logs for a specific switch to troubleshoot an issue?
Select an answer first
7foundation · easy
What initial configuration is typically required on a switch before it can be adopted into Mist?
Select an answer first
8foundation · easy
What is the purpose of a trunk port in VLAN management?
Select an answer first
9application · medium
An admin is configuring ports for a conference room that will host both wired and wireless devices. The room has a mix of laptops, IP cameras, and a VoIP phone. The admin wants to ensure that each device type gets the appropriate VLAN and that the ports are secure. What is the best way to configure the ports using port profiles?
Select an answer first
10application · medium
A network admin is monitoring switch performance and notices that a particular switch is experiencing high error rates on a specific interface. The admin wants to determine if this is a physical issue or a configuration issue. What should the admin do?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-460

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-460” is a trademark of its owner, used for identification only.