In the Mist portal, what must you define when creating a dynamic port policy?

The switch model and firmware version

Match criteria and the port settings to apply when matched

The IP address of the RADIUS server and the shared secret

The network topology and routing protocols

A technician reports that a barcode scanner is being assigned to the wrong VLAN. The scanner is LLDP-enabled and the dynamic port profile for the scanner exists. What is the first step to troubleshoot this issue?

Delete the dynamic port profile and recreate it.

Disable and re-enable the switch port to clear any stale configuration.

Check the LLDP information that the scanner is advertising in the Mist portal's switch port details.

Reboot the scanner to force it to re-send LLDP packets.

A manufacturing company has a mix of devices on their network, including PLCs, IP cameras, and VoIP phones. They want to automatically configure ports with the correct VLAN and QoS settings when these devices are connected. What is the best way to achieve this in Mist?

Manually configure each port based on the device that will be connected.

Use a single dynamic port profile that applies the same VLAN and QoS to all devices.

Use RADIUS to authenticate each device and assign VLANs based on the device's MAC address.

Create dynamic port profiles for each device type, using LLDP match criteria and associated port settings.

Which of the following is an example of match criteria for a dynamic port policy?

LLDP system name containing 'IP Phone'

Time of day being business hours

A network admin is creating a dynamic port profile for a new model of IP phone. The phone advertises LLDP system name 'Juniper Phone 5000'. The admin wants to match any phone from this vendor. What match criteria should they use?

Use a wildcard match on the LLDP system name, such as 'Juniper*'.

Use the exact LLDP system name 'Juniper Phone 5000'.

Juniper NetworksCertified Specialist, Mist AI Wired (JNCIS-MistAI)

Domain 3Objective 3

Dynamic Port Configuration JN0-460 Practice Questions (Page 3)

Part of the Wired Assurance Management or Operations domain, which makes up ~24% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~8–14 in this domain), expect 1–2 from this objective — we provide 24 practice questions to prepare you well beyond it. (estimate)

24questions here

5free pages

6concepts

Questions 11–15

11foundation · easy
In the Mist portal, what must you define when creating a dynamic port policy?
Select an answer first
12application · medium
A technician reports that a barcode scanner is being assigned to the wrong VLAN. The scanner is LLDP-enabled and the dynamic port profile for the scanner exists. What is the first step to troubleshoot this issue?
Select an answer first
13application · medium
A manufacturing company has a mix of devices on their network, including PLCs, IP cameras, and VoIP phones. They want to automatically configure ports with the correct VLAN and QoS settings when these devices are connected. What is the best way to achieve this in Mist?
Select an answer first
14foundation · easy
Which of the following is an example of match criteria for a dynamic port policy?
Select an answer first
15application · medium
A network admin is creating a dynamic port profile for a new model of IP phone. The phone advertises LLDP system name 'Juniper Phone 5000'. The admin wants to match any phone from this vendor. What match criteria should they use?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-460

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-460” is a trademark of its owner, used for identification only.