Dynamic Port Configuration JN0-460 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   What is a dynamic port profile in Juniper Mist Wired Assurance?

   • AA security policy that blocks all unknown devices
   • BA template for switch-level settings such as hostname and NTP
   • CA set of port settings that are applied automatically when a matching device is detected
   • DA static configuration that must be manually applied to each port
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   A hospital is deploying Juniper EX switches managed by Mist. They want to automatically place IP phones and PCs on separate VLANs when either device is plugged into any access port. The network team has already configured LLDP globally on the switches. What must they do in the Mist portal to achieve this?

   • AConfigure a single dynamic port profile with a VLAN that supports both IP phones and PCs using LLDP-MED.
   • BManually assign the correct VLAN to each port based on the device type observed during a site survey.
   • CCreate a dynamic port profile that matches LLDP system name 'IP Phone' and assign the phone VLAN; create another profile matching 'PC' and assign the data VLAN.
   • DEnable RADIUS-based authentication on all access ports and configure the RADIUS server to return VLAN attributes for each device.
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   What is the primary purpose of dynamic port configuration in Juniper Mist Wired Assurance?

   • ATo automatically adjust switch port settings based on the type of device connected
   • BTo enable remote management of switches through the Mist cloud
   • CTo replace the need for VLANs in the network
   • DTo provide a static configuration for all switch ports to ensure consistency
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   In the context of dynamic port configuration, what is the role of RADIUS authentication?

   • ATo authenticate the connected device and receive VLAN assignment from the RADIUS server
   • BTo encrypt all data transmitted on the port
   • CTo provide power over Ethernet to the device
   • DTo discover the device type using LLDP
   Reveal Solution Discussion Select an answer first
6. 10application · easy

   A retail chain wants to reduce the time IT spends manually configuring switch ports for new devices. They have Juniper EX switches managed by Mist. What is the primary benefit of using dynamic port configuration in this scenario?

   • AIt provides a real-time dashboard of all connected devices and their IP addresses.
   • BIt increases the security of the network by encrypting all traffic on the switch ports.
   • CIt allows the switch to automatically reboot when a new device is connected.
   • DIt automatically applies the correct port settings based on the connected device, reducing manual configuration.
   Reveal Solution Discussion Select an answer first