A university wants to deploy a wireless network that allows students to authenticate with their existing Active Directory credentials. They also want to ensure that each user's traffic is encrypted. Which authentication method should they use?

WPA2-Enterprise with 802.1X and RADIUS

WPA2-Personal with a pre-shared key

Open authentication with a captive portal

WPA3-SAE with a shared password

A hospital wants to provide wireless access for both staff and patients. Staff must use WPA2-Enterprise with 802.1X, while patients should use a captive portal. The hospital also wants to ensure that patient traffic is isolated from the staff network. What is the best approach?

Use WPA2-Personal for both staff and patients

Create two SSIDs: one for staff with WPA2-Enterprise and one for patients with a captive portal, and place them on different VLANs

Use an open SSID for both staff and patients

Use a single SSID with WPA2-Enterprise and a captive portal

A company is planning a wireless network for a large warehouse. They need to support many IoT devices that only support 2.4 GHz. The warehouse has multiple APs. What should they do to ensure reliable connectivity for these devices?

Disable the 5 GHz radio on all APs

Enable band steering to push IoT devices to 5 GHz

Increase the number of SSIDs broadcast on 2.4 GHz

Use only 2.4 GHz channels 1, 6, and 11 and reduce AP transmit power

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 3Objective 1

WLAN Concepts JN0-452 Practice Questions (Page 2)

Part of the Juniper Mist WLAN Concepts domain, which makes up ~20% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–12 in this domain), expect 1–2 from this objective — we provide 20 practice questions to prepare you well beyond it. (estimate)

20questions here

4free pages

4concepts

Questions 6–10

6application · medium
A university wants to deploy a wireless network that allows students to authenticate with their existing Active Directory credentials. They also want to ensure that each user's traffic is encrypted. Which authentication method should they use?
Select an answer first
7expert · hard
A hospital wants to provide wireless access for both staff and patients. Staff must use WPA2-Enterprise with 802.1X, while patients should use a captive portal. The hospital also wants to ensure that patient traffic is isolated from the staff network. What is the best approach?
Select an answer first
8foundation · easy
Which IEEE 802.11 standard introduced the use of the 5 GHz band and provided data rates up to 54 Mbps?
Select an answer first
9application · medium
A company is planning a wireless network for a large warehouse. They need to support many IoT devices that only support 2.4 GHz. The warehouse has multiple APs. What should they do to ensure reliable connectivity for these devices?
Select an answer first
10application · medium
A network engineer is troubleshooting a wireless issue where clients are frequently disconnecting and re-associating. The engineer notices that the APs are using overlapping channels. What is the most likely cause of the disconnections?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.

WLAN Concepts JN0-452 Practice Questions (Page 2)

Questions 6–10

A university wants to deploy a wireless network that allows students to authenticate with their existing Active Directory credentials. They also want to ensure that each user's traffic is encrypted. Which authentication method should they use?

A hospital wants to provide wireless access for both staff and patients. Staff must use WPA2-Enterprise with 802.1X, while patients should use a captive portal. The hospital also wants to ensure that patient traffic is isolated from the staff network. What is the best approach?

Which IEEE 802.11 standard introduced the use of the 5 GHz band and provided data rates up to 54 Mbps?

A company is planning a wireless network for a large warehouse. They need to support many IoT devices that only support 2.4 GHz. The warehouse has multiple APs. What should they do to ensure reliable connectivity for these devices?

A network engineer is troubleshooting a wireless issue where clients are frequently disconnecting and re-associating. The engineer notices that the APs are using overlapping channels. What is the most likely cause of the disconnections?

Keep studying — Juniper Mist WLAN Concepts