A school district's network team is deploying WIDS. They want to ensure that APs in neighboring buildings, which are not part of the district's network, are not contained. What should they configure in the WIDS policy?

Add the neighboring APs' MAC addresses to the rogue AP whitelist

Set the WIDS policy to contain all unknown APs

Increase the containment threshold to require a higher signal strength

Disable WIDS on the APs near the building boundary

A mall's IT team receives a WIDS alert for a rogue AP. The alert shows the AP is on channel 11 and has a signal strength of -60 dBm. The team wants to determine if the AP is inside the mall or in a nearby store. What information from the alert would be most useful?

The list of Mist APs that detected the rogue AP and their signal strengths

The channel the rogue AP is using

What is the purpose of a containment action in Juniper Mist WIDS?

To quarantine a device for malware scanning.

To relocate a rogue AP to a different channel.

To prevent a rogue device from communicating with the network.

To upgrade the firmware of a rogue AP.

Which of the following is an example of a misconfigured AP that Juniper Mist would flag?

An AP that is mounted on a ceiling.

An AP broadcasting an SSID with no encryption enabled.

An AP that is using a 20 MHz channel width.

An AP with a firmware version that is one release behind.

Which event would Juniper Mist most likely flag as a rogue client?

A device that is roaming between two managed APs.

A device that is using a high amount of bandwidth.

A device that is connected to the guest SSID.

A device with a MAC address not in the client allowlist repeatedly attempting to authenticate.

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 3Objective 6

Wireless Intrusion Detection and Prevention JN0-452 Practice Questions (Page 1)

Part of the Juniper Mist WLAN Concepts domain, which makes up ~20% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–12 in this domain), expect 1–2 from this objective — we provide 28 practice questions to prepare you well beyond it. (estimate)

28questions here

6free pages

9concepts

Questions 1–5

1application · medium
A school district's network team is deploying WIDS. They want to ensure that APs in neighboring buildings, which are not part of the district's network, are not contained. What should they configure in the WIDS policy?
Select an answer first
2application · medium
A mall's IT team receives a WIDS alert for a rogue AP. The alert shows the AP is on channel 11 and has a signal strength of -60 dBm. The team wants to determine if the AP is inside the mall or in a nearby store. What information from the alert would be most useful?
Select an answer first
3foundation · easy
What is the purpose of a containment action in Juniper Mist WIDS?
Select an answer first
4foundation · easy
Which of the following is an example of a misconfigured AP that Juniper Mist would flag?
Select an answer first
5foundation · easy
Which event would Juniper Mist most likely flag as a rogue client?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.