What is the purpose of the reassociation request frame during a client's roam to a new access point?

To authenticate the client with the new AP using a password

To inform the new AP of the client's previous AP and request admission

To request a new IP address from the new AP's DHCP server

To request the new AP to forward all frames to the old AP

How does a Wi-Fi client typically decide to roam to a new access point?

By randomly selecting an AP from the scan results

By waiting for the AP to instruct it to roam

By comparing the signal strength and data rate of the current AP with neighboring APs

By using the IP address of the AP to determine the best network

A small office wants to set up a Wi-Fi network for guests. They want to provide internet access without requiring a password, but they also want to prevent unauthorized users from accessing internal resources. Which authentication method should they use?

Open authentication with a captive portal

Open authentication with MAC filtering

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 1Objective 6

WLAN Association and Roaming JN0-452 Practice Questions (Page 3)

Part of the Wi-Fi Fundamentals domain, which makes up ~20% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–12 in this domain), expect 1–2 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)

21questions here

5free pages

8concepts

Questions 11–15

11foundation · easy
What is the purpose of the reassociation request frame during a client's roam to a new access point?
Select an answer first
12foundation · easy
How does a Wi-Fi client typically decide to roam to a new access point?
Select an answer first
13foundation · easy
Which fast roaming protocol allows a client to pre-authenticate with a target AP and reduce the time spent during the 4-way handshake?
Select an answer first
14application · medium
A small office wants to set up a Wi-Fi network for guests. They want to provide internet access without requiring a password, but they also want to prevent unauthorized users from accessing internal resources. Which authentication method should they use?
Select an answer first
15application · medium
A user's laptop is connected to a Wi-Fi network and moves from one floor to another. The laptop roams from AP1 to AP2, but the IP address remains the same. The network administrator confirms that AP1 and AP2 are on different subnets. What type of roaming is occurring?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.

WLAN Association and Roaming JN0-452 Practice Questions (Page 3)

Questions 11–15

What is the purpose of the reassociation request frame during a client's roam to a new access point?

How does a Wi-Fi client typically decide to roam to a new access point?

Which fast roaming protocol allows a client to pre-authenticate with a target AP and reduce the time spent during the 4-way handshake?

A small office wants to set up a Wi-Fi network for guests. They want to provide internet access without requiring a password, but they also want to prevent unauthorized users from accessing internal resources. Which authentication method should they use?

A user's laptop is connected to a Wi-Fi network and moves from one floor to another. The laptop roams from AP1 to AP2, but the IP address remains the same. The network administrator confirms that AP1 and AP2 are on different subnets. What type of roaming is occurring?

Keep studying — Wi-Fi Fundamentals