What is the primary purpose of the Association Request frame in a Wi-Fi network?

To ask the AP to accept the client into the BSS and provide network access

To announce the AP's capabilities and SSID to nearby clients

To request a specific IP address from the AP's DHCP server

To authenticate the client with the AP using a password

A company wants to deploy a WPA3-Enterprise network for employees. They have a mix of devices, some of which do not support WPA3. What should they do to ensure compatibility while maintaining security?

Enable WPA3-Enterprise with transition mode.

Use WPA3-Personal with a pre-shared key.

Use open authentication with a captive portal.

Which factor is NOT typically considered by a client when deciding to roam?

The number of clients associated with the target AP

The supported data rates of the target AP

The received signal strength (RSSI) of the current AP

The channel utilization of the current AP

What is the correct sequence of steps a client performs when roaming from one access point to another?

Reassociation, Authentication, Probe

Probe, Authentication, Reassociation

Probe, Reassociation, Authentication

Authentication, Probe, Reassociation

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 1Objective 6

WLAN Association and Roaming JN0-452 Practice Questions (Page 2)

Part of the Wi-Fi Fundamentals domain, which makes up ~20% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–12 in this domain), expect 1–2 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)

21questions here

5free pages

8concepts

Questions 6–10

6foundation · easy
What is the primary purpose of the Association Request frame in a Wi-Fi network?
Select an answer first
7foundation · easy
Which authentication method uses a RADIUS server to validate user credentials, typically in a corporate environment?
Select an answer first
8application · medium
A company wants to deploy a WPA3-Enterprise network for employees. They have a mix of devices, some of which do not support WPA3. What should they do to ensure compatibility while maintaining security?
Select an answer first
9foundation · easy
Which factor is NOT typically considered by a client when deciding to roam?
Select an answer first
10foundation · easy
What is the correct sequence of steps a client performs when roaming from one access point to another?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.