Which environmental condition is most likely to degrade Wi-Fi location accuracy?

Incorrect time zone on the client device

Low client device screen brightness

High number of users on the network

Signal interference from other wireless devices

A factory is using Mist to track inventory pallets with Wi-Fi tags. The tags transmit every 30 seconds. The administrator notices that location estimates jump between two adjacent zones. What is the most likely cause?

The tags are transmitting too infrequently, causing the location engine to interpolate between old and new positions

The tags are using BLE instead of Wi-Fi

The tags are moving too fast for the location engine to track

The APs are not calibrated for the factory environment

During Mist location configuration, what is the purpose of calibrating the location environment?

To increase the transmit power of access points

To improve the accuracy of location calculations by accounting for the specific RF environment

To reduce the number of access points needed for coverage

To configure the SSID and security settings

A hospital is deploying Mist for asset tracking of medical equipment. The environment has many patient rooms with thick walls and a mix of AP models. After initial deployment, asset locations are frequently inaccurate. What should the administrator do first to improve accuracy?

Enable BLE on all APs and attach BLE tags to all assets

Perform a site survey and calibrate the location engine using the Mist mobile app

Reduce the number of APs to avoid signal overlap

Increase the AP transmit power to overcome wall attenuation

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 6Objective 1

Wi-Fi Location JN0-452 Practice Questions (Page 5)

Part of the Juniper Mist Location-based Services (LBS) domain, which makes up ~15% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 1–2 from this objective — we provide 28 practice questions to prepare you well beyond it. (estimate)

28questions here

6free pages

6concepts

Questions 21–25

21foundation · easy
Which use case for Wi-Fi location data involves guiding users to a specific destination within a facility?
Select an answer first
22foundation · easy
Which environmental condition is most likely to degrade Wi-Fi location accuracy?
Select an answer first
23application · medium
A factory is using Mist to track inventory pallets with Wi-Fi tags. The tags transmit every 30 seconds. The administrator notices that location estimates jump between two adjacent zones. What is the most likely cause?
Select an answer first
24foundation · easy
During Mist location configuration, what is the purpose of calibrating the location environment?
Select an answer first
25application · medium
A hospital is deploying Mist for asset tracking of medical equipment. The environment has many patient rooms with thick walls and a mix of AP models. After initial deployment, asset locations are frequently inaccurate. What should the administrator do first to improve accuracy?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.