In Juniper Mist, which tool or feature would you use to investigate why a specific client's location is reported inaccurately?

Mist client insights and event logs

Mist location analytics dashboard

A logistics company is deploying Mist in a distribution center. The center has a very high ceiling (12 meters) and uses automated guided vehicles (AGVs) that move quickly. The company needs to track AGVs with sub-5-meter accuracy. The APs are currently mounted on the ceiling at 12 meters. Initial testing shows accuracy is around 8 meters. Which combination of changes will most likely achieve the required accuracy?

Increase AP transmit power and enable BLE on all APs

Increase the AP spacing to 20 meters to reduce overlap and interference

Lower the APs to 6 meters and reduce AP spacing to 12 meters

Use directional antennas pointed at the floor

A hospital has a Mist deployment that was accurate for months. Recently, location accuracy has degraded significantly in the emergency department. No APs have been added or removed, and the APs are healthy. What is the most likely cause?

The location engine has been reconfigured to use BLE instead of Wi-Fi

The APs have been rebooted and lost their calibration data

New medical equipment or furniture has been introduced, changing the RF environment

The hospital has changed the SSID of the network

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 6Objective 1

Wi-Fi Location JN0-452 Practice Questions (Page 3)

Part of the Juniper Mist Location-based Services (LBS) domain, which makes up ~15% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 1–2 from this objective — we provide 28 practice questions to prepare you well beyond it. (estimate)

28questions here

6free pages

6concepts

Questions 11–15

11foundation · easy
In Juniper Mist, which tool or feature would you use to investigate why a specific client's location is reported inaccurately?
Select an answer first
12expert · hard
A logistics company is deploying Mist in a distribution center. The center has a very high ceiling (12 meters) and uses automated guided vehicles (AGVs) that move quickly. The company needs to track AGVs with sub-5-meter accuracy. The APs are currently mounted on the ceiling at 12 meters. Initial testing shows accuracy is around 8 meters. Which combination of changes will most likely achieve the required accuracy?
Select an answer first
13foundation · easy
Which Wi-Fi location use case is most likely to be used by a retail store to send a coupon to a customer's phone when they are near a specific product?
Select an answer first
14expert · hard
A hospital has a Mist deployment that was accurate for months. Recently, location accuracy has degraded significantly in the emergency department. No APs have been added or removed, and the APs are healthy. What is the most likely cause?
Select an answer first
15foundation · easy
Which two types of data does Juniper Mist primarily use to provide location services?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.

Wi-Fi Location JN0-452 Practice Questions (Page 3)

Questions 11–15

In Juniper Mist, which tool or feature would you use to investigate why a specific client's location is reported inaccurately?

Which Wi-Fi location use case is most likely to be used by a retail store to send a coupon to a customer's phone when they are near a specific product?

A hospital has a Mist deployment that was accurate for months. Recently, location accuracy has degraded significantly in the emergency department. No APs have been added or removed, and the APs are healthy. What is the most likely cause?

Which two types of data does Juniper Mist primarily use to provide location services?

Keep studying — Juniper Mist Location-based Services (LBS)