What is the primary objective when assigning channels to access points in a dense deployment?

To use only the 5 GHz band because it has more channels

To minimize co-channel interference by reusing channels only at adequate distances

To use the same channel on all access points to simplify management

To assign channels randomly to avoid predictability

A hotel wants to ensure that guests in the lobby have a strong signal, but they also want to minimize interference with the conference rooms on the same floor. The lobby and conference rooms are served by different APs. What is the best RRM configuration to achieve this?

Configure RRM to run more frequently so it can quickly adjust power based on client demand.

Disable RRM for the conference room APs and manually set them to a low power level.

Set all APs to the same power level to ensure consistent coverage across the floor.

Set a higher minimum power for the lobby APs and a lower maximum power for the conference room APs.

What is the main purpose of adjusting transmit power levels on access points?

To make the wireless network more secure

To reduce the power consumption of the access point

To ensure adequate coverage while minimizing co-channel interference

To increase the number of clients that can connect to each AP

When planning channel assignments for access points, which factor is most important to consider?

The number of Ethernet ports on the access point

The color of the access point casing

The firmware version of the access point

The presence of neighboring access points and other RF sources on the same or overlapping channels

What is the first step you should take when troubleshooting a coverage issue that may be related to RRM?

Check the RRM dashboard and reports to see if any recent changes affected coverage

Change the SSID to a different name

Reboot all access points immediately

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 4Objective 4

Radio Resource Management (RRM) JN0-452 Practice Questions (Page 3)

Part of the Juniper Mist Network Operations domain, which makes up ~20% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–12 in this domain), expect 1–2 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here

4free pages

6concepts

Questions 11–15

11foundation · easy
What is the primary objective when assigning channels to access points in a dense deployment?
Select an answer first
12application · medium
A hotel wants to ensure that guests in the lobby have a strong signal, but they also want to minimize interference with the conference rooms on the same floor. The lobby and conference rooms are served by different APs. What is the best RRM configuration to achieve this?
Select an answer first
13foundation · easy
What is the main purpose of adjusting transmit power levels on access points?
Select an answer first
14foundation · easy
When planning channel assignments for access points, which factor is most important to consider?
Select an answer first
15foundation · easy
What is the first step you should take when troubleshooting a coverage issue that may be related to RRM?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.