Radio Resource Management (RRM) JN0-452 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   What is the role of the RRM algorithm in Juniper Mist regarding transmit power?

   • AIt disables power adjustment and relies on manual configuration
   • BIt adjusts power levels to provide adequate coverage while minimizing interference
   • CIt sets power based solely on the number of connected clients
   • DIt sets all APs to maximum power to ensure the widest coverage
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   In RRM, what is the effect of setting an access point's transmit power too high?

   • AIt can cause co-channel interference with neighboring access points
   • BIt improves the signal-to-noise ratio for all clients
   • CIt has no effect on the wireless network
   • DIt reduces the coverage area of the access point
   Reveal Solution Discussion Select an answer first
4. 8application · medium

   A manufacturing plant has a high density of APs in a small area to support IoT sensors. The 5 GHz band is heavily used, and the network team wants to ensure that RRM assigns channels to maximize capacity. Which RRM setting should they prioritize?

   • ADisable RRM and manually assign channels to each AP based on a static plan.
   • BSet a very high minimum transmit power to ensure all IoT sensors have a strong signal.
   • CEnable the 'coverage' mode for RRM, which ensures the widest possible coverage area for each AP.
   • DEnable the 'capacity' mode for RRM, which prioritizes channel reuse and higher throughput over raw coverage.
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   Which algorithm is used by Juniper Mist RRM to determine the best channel for each access point?

   • AA round-robin algorithm that cycles through channels in a fixed order
   • BA static algorithm that assigns channels based on the AP's MAC address
   • CA random algorithm that selects channels without regard to interference
   • DA machine-learning algorithm that analyzes RF metrics and interference data
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   Where in the Juniper Mist portal would you configure RRM settings such as thresholds and schedules?

   • AUnder the 'Firmware' section of the access point settings
   • BUnder the 'Radio Management' section of the site configuration
   • CUnder the 'Security' section of the organization settings
   • DUnder the 'Reports' section of the analytics dashboard
   Reveal Solution Discussion Select an answer first