A company has deployed Marvis Minis and wants to use them to monitor a new guest Wi-Fi network. The Minis are currently configured to test the corporate SSID. The network team wants to add the guest SSID to the Mini's test list without disrupting the current monitoring. What is the correct way to do this?

Edit the Mini's configuration in the Mist portal to add the guest SSID to the list of SSIDs to test

Use the Marvis Actions page to automatically add the guest SSID to all Minis

Create a new site for the guest network and assign the Minis to that site

Re-provision the Minis from scratch to apply the new SSID configuration

Which Marvis feature is used to troubleshoot wireless issues detected by Marvis Minis?

The 'Site Health' dashboard, which shows historical trends but not specific troubleshooting steps.

The 'WLAN Configuration' page, which allows you to adjust settings to fix issues.

Marvis Actions, which provide recommended remediation steps for identified issues.

Marvis Minis' local log viewer, which displays real-time logs on the device.

A university has deployed Marvis Minis across multiple buildings. The network team wants to use the Minis to test a new SSID that will be used for IoT devices. They have configured the new SSID on the APs, but the Minis are still testing the old SSID. What is the most likely reason for this, and what should they do?

The new SSID is not broadcasting in the Minis' location, so they cannot detect it

The Minis are connected to the wired network and cannot test the new SSID until they are switched to Wi-Fi

The Minis' network settings have not been updated to include the new SSID; they must edit the Mini's configuration in the Mist portal to add the new SSID to the test list

The Minis are not compatible with the new SSID's security type; they need to be replaced with a newer model

Where in the Mist portal do you assign a Marvis Mini to a specific site?

In the Site configuration under the 'Marvis Minis' section.

In the Marvis Virtual Network Assistant's 'Actions' tab.

In the 'Network Templates' section.

In the Organization settings under 'Device Inventory'.

A network admin notices that a Marvis Mini is offline in the Mist portal. The Mini is connected to a PoE switch, and the switch port shows link. What is the most likely cause of the Mini being offline?

The Mini is not assigned to a site, so it cannot connect to the Mist cloud

The Mini's firmware is corrupted and needs to be re-flashed

The Mini's Wi-Fi radio is disabled, preventing it from connecting to the Mist cloud

The Mini's management IP address is not reachable from the Mist cloud due to a firewall rule

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 5Objective 5

Marvis Minis JN0-452 Practice Questions (Page 4)

Part of the Marvis Virtual Network Assistant domain, which makes up ~17% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–10 in this domain), expect 1–2 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)

21questions here

5free pages

4concepts

Questions 16–20

16expert · hard
A company has deployed Marvis Minis and wants to use them to monitor a new guest Wi-Fi network. The Minis are currently configured to test the corporate SSID. The network team wants to add the guest SSID to the Mini's test list without disrupting the current monitoring. What is the correct way to do this?
Select an answer first
17foundation · easy
Which Marvis feature is used to troubleshoot wireless issues detected by Marvis Minis?
Select an answer first
18expert · hard
A university has deployed Marvis Minis across multiple buildings. The network team wants to use the Minis to test a new SSID that will be used for IoT devices. They have configured the new SSID on the APs, but the Minis are still testing the old SSID. What is the most likely reason for this, and what should they do?
Select an answer first
19foundation · easy
Where in the Mist portal do you assign a Marvis Mini to a specific site?
Select an answer first
20application · medium
A network admin notices that a Marvis Mini is offline in the Mist portal. The Mini is connected to a PoE switch, and the switch port shows link. What is the most likely cause of the Mini being offline?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.

Marvis Minis JN0-452 Practice Questions (Page 4)

Questions 16–20

Which Marvis feature is used to troubleshoot wireless issues detected by Marvis Minis?

Where in the Mist portal do you assign a Marvis Mini to a specific site?

A network admin notices that a Marvis Mini is offline in the Mist portal. The Mini is connected to a PoE switch, and the switch port shows link. What is the most likely cause of the Mini being offline?

Keep studying — Marvis Virtual Network Assistant