Marvis Minis JN0-452 Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   What is the primary purpose of Marvis Minis in a Mist AI wireless network?

   • ATo act as hardware sensors that continuously monitor the wireless and wired network and provide data to Marvis for proactive insights.
   • BTo replace access points in high-density areas to improve wireless coverage.
   • CTo serve as a cloud-based virtual assistant that answers user queries about network status.
   • DTo provide additional PoE power to access points and switches in the network.
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   A university has deployed Marvis Minis in a large lecture hall to monitor Wi-Fi performance. The IT team notices that the Minis are reporting on the wrong SSID and are not running the expected tests. They need to correct the configuration. Where in the Mist portal should they make these changes?

   • AUse the Marvis Actions page to run a 'reconfigure Mini' command
   • BNavigate to the site's Marvis Minis page, select the Mini, and edit its network settings to assign the correct SSID and test profile
   • CRe-provision the Mini from the Inventory page by changing its assigned site
   • DModify the global WLAN settings to change the SSID for all Minis in the organization
   Reveal Solution Discussion Select an answer first
4. 3application · medium

   A company has deployed Marvis Minis throughout its office. The network team receives a Marvis insight that a specific Mini is reporting high latency and packet loss on the Wi-Fi network. The team wants to determine if the issue is isolated to the Mini's location or affects the entire access point. What should they do first?

   • ADisable the Mini's tests and run a manual speed test from a laptop at the same location
   • BReboot the Mini from the Mist portal to clear any temporary issues
   • CImmediately replace the Mini with a new unit to rule out hardware failure
   • DCheck the Marvis Minis page to view the Mini's historical test results and compare them with other Minis connected to the same AP
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   What type of data do Marvis Minis provide to Marvis for monitoring wired network health?

   • ASynthetic test results from wired connectivity checks, such as DHCP and DNS resolution.
   • BPacket captures of all wired traffic for deep packet inspection.
   • CNetFlow data to analyze bandwidth usage.
   • DSNMP traps from switches and routers in the network.
   Reveal Solution Discussion Select an answer first
6. 5expert · hard

   A hospital has deployed Marvis Minis to monitor Wi-Fi in patient rooms. The network team receives a Marvis insight that a Mini in a specific room is reporting intermittent connectivity. The team checks the Mini's status and finds it is online but experiencing frequent disconnects from the Wi-Fi network. What is the most likely cause, and what should they investigate first?

   • ACheck the Mini's wired management link, as it may be causing the disconnects
   • BReplace the Mini with a new unit, as it is likely defective
   • CDisable the Mini's Wi-Fi tests and rely on wired monitoring only
   • DInvestigate the Wi-Fi coverage in that room, including signal strength and interference from medical equipment
   Reveal Solution Discussion Select an answer first