An administrator sees a Marvis Action that says 'Client device is experiencing high latency on the network.' The action does not specify whether the issue is on the Wi-Fi, Wired, or WAN segment. The administrator needs to determine the correct category to filter for this action. Which approach is most effective?

Filter by all categories and look for the action in each

Assume it is a Wi-Fi issue because most clients are wireless

Open the action details to see the affected device and path information

Ignore the action because it is ambiguous

What is the role of the 'Recommended Actions' section within a Marvis Action?

It lists all clients currently connected to the network

It provides suggested remediation steps to resolve the detected issue

It shows the historical performance of the network

It displays the firmware versions of all devices

A Marvis Action is categorized as 'Wired'. What type of issue does this action most likely address?

An issue affecting a wired switch port or connected wired client

An issue affecting Wi-Fi coverage or wireless client connectivity

An issue affecting WAN link performance or availability

An issue related to location tracking accuracy

A Marvis Action indicates that a specific access point is experiencing high channel utilization, and the recommended action is to change the channel width from 40 MHz to 20 MHz. After applying the change, what should the administrator do next to ensure the issue is resolved?

Monitor the action status and check if the anomaly clears

Delete the action from the console to reduce clutter

Immediately escalate the action to the next tier of support

Mark the action as resolved in the Marvis Actions console

A Marvis Action indicates 'Multiple clients on AP-3 are experiencing slow throughput.' The administrator needs to identify which clients are affected. Where should the administrator look within the action details?

The recommended actions section

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 5Objective 4

Marvis Actions JN0-452 Practice Questions (Page 3)

Part of the Marvis Virtual Network Assistant domain, which makes up ~17% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–10 in this domain), expect 1–2 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)

27questions here

6free pages

7concepts

Questions 11–15

11expert · hard
An administrator sees a Marvis Action that says 'Client device is experiencing high latency on the network.' The action does not specify whether the issue is on the Wi-Fi, Wired, or WAN segment. The administrator needs to determine the correct category to filter for this action. Which approach is most effective?
Select an answer first
12foundation · easy
What is the role of the 'Recommended Actions' section within a Marvis Action?
Select an answer first
13foundation · easy
A Marvis Action is categorized as 'Wired'. What type of issue does this action most likely address?
Select an answer first
14application · medium
A Marvis Action indicates that a specific access point is experiencing high channel utilization, and the recommended action is to change the channel width from 40 MHz to 20 MHz. After applying the change, what should the administrator do next to ensure the issue is resolved?
Select an answer first
15application · medium
A Marvis Action indicates 'Multiple clients on AP-3 are experiencing slow throughput.' The administrator needs to identify which clients are affected. Where should the administrator look within the action details?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.