After a Juniper Mist access point is claimed, what must be done to make it operational in a specific location?

Enable SSH on the access point.

Set the access point to factory default mode.

Assign the access point to a site.

Configure a static route on the access point.

A hotel is deploying Juniper Mist APs across multiple floors. They want to provide guest Wi-Fi with captive portal authentication and also offer a separate SSID for staff that accesses local printers. The network team wants to minimize the load on the Mist Edge. Which deployment mode combination should they use?

Tunneled mode for both guest and staff Wi-Fi

Tunneled mode for guest Wi-Fi and bridged mode for staff Wi-Fi

Bridged mode for guest Wi-Fi and tunneled mode for staff Wi-Fi

Bridged mode for both guest and staff Wi-Fi

A company has just received a shipment of Juniper Mist APs. The administrator has already claimed them in the Mist portal. What is the next step to make the APs operational?

Assign the APs to a site and apply a configuration template

Create a new organization for the APs

Upgrade the AP firmware before site assignment

Power on the APs and wait for them to auto-configure

In the Juniper Mist portal, what is the purpose of creating a site during initial setup?

To define a physical location where access points and other network devices are deployed.

To create a separate billing account for each physical location.

To configure the Mist cloud region where data will be stored.

To assign administrative roles to users within the organization.

A company has purchased 50 Juniper Mist APs and wants to add them to their existing Mist organization. The APs are currently unclaimed and have not been configured. What is the first step the administrator must perform in the Mist portal to make these APs manageable?

Upgrade the AP firmware via the Mist portal

Configure a WLAN template and apply it to the APs

Create a new site and assign the APs to it

Claim the APs using their serial numbers

Juniper NetworksCertified Specialist, Mist AI Wireless (JNCIS-MistAI)

Domain 2Objective 3

Deployment and Connectivity JN0-452 Practice Questions (Page 4)

Part of the Juniper Mist WLAN Architecture and Deployment domain, which makes up ~8% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~3–5 in this domain), expect 1–2 from this objective — we provide 25 practice questions to prepare you well beyond it. (estimate)

25questions here

5free pages

9concepts

Questions 16–20

16foundation · easy
After a Juniper Mist access point is claimed, what must be done to make it operational in a specific location?
Select an answer first
17expert · hard
A hotel is deploying Juniper Mist APs across multiple floors. They want to provide guest Wi-Fi with captive portal authentication and also offer a separate SSID for staff that accesses local printers. The network team wants to minimize the load on the Mist Edge. Which deployment mode combination should they use?
Select an answer first
18application · easy
A company has just received a shipment of Juniper Mist APs. The administrator has already claimed them in the Mist portal. What is the next step to make the APs operational?
Select an answer first
19foundation · easy
In the Juniper Mist portal, what is the purpose of creating a site during initial setup?
Select an answer first
20application · easy
A company has purchased 50 Juniper Mist APs and wants to add them to their existing Mist organization. The APs are currently unclaimed and have not been configured. What is the first step the administrator must perform in the Mist portal to make these APs manageable?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-452

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-452” is a trademark of its owner, used for identification only.