An administrator is configuring a router to enable communication between two VLANs using static routes. The router has directly connected interfaces to each VLAN's subnet. What is the minimum configuration required for the router to forward packets between the two VLANs?

Create a static route on the router for each VLAN subnet with the next-hop set to the local interface IP address of the same VLAN.

Configure a single static route with a destination of 0.0.0.0/0 pointing to the default gateway of one of the VLANs.

Configure a static route on the router for each VLAN subnet, pointing to the next-hop IP address of the other VLAN's gateway.

Enable IP routing on the router and configure IP addresses on the interfaces connected to each VLAN; the router will automatically route between them.

What is the purpose of 802.1Q encapsulation on a trunk link?

To compress data to increase throughput

To provide error checking for the frame

To tag frames with VLAN information so multiple VLANs can traverse the link

To encrypt data transmitted over the link

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 1Objective 6

Inter-VLAN Routing JN0-352 Practice Questions (Page 4)

Part of the Layer 2 Switching and VLANs domain, which makes up ~15% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 1–1 from this objective — we provide 17 practice questions to prepare you well beyond it. (estimate)

17questions here

4free pages

6concepts

Questions 16–17

16foundation · medium
An administrator is configuring a router to enable communication between two VLANs using static routes. The router has directly connected interfaces to each VLAN's subnet. What is the minimum configuration required for the router to forward packets between the two VLANs?
Select an answer first
17foundation · easy
What is the purpose of 802.1Q encapsulation on a trunk link?
Select an answer first

Finished these 2 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.

Inter-VLAN Routing JN0-352 Practice Questions (Page 4)

Questions 16–17

An administrator is configuring a router to enable communication between two VLANs using static routes. The router has directly connected interfaces to each VLAN's subnet. What is the minimum configuration required for the router to forward packets between the two VLANs?

What is the purpose of 802.1Q encapsulation on a trunk link?

Keep studying — Layer 2 Switching and VLANs