Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)
Domain 1Objective 8
Configure, Monitor, or Troubleshoot VLANs and inter-VLAN Routing JN0-352 Practice Questions (Page 4)
Part of the Layer 2 Switching and VLANs domain, which makes up ~15% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 1–1 from this objective — we provide 19 practice questions to prepare you well beyond it. (estimate)
19questions here
4free pages
6concepts
Questions 16–19
- 16
Which command shows the operational state of a single VLAN, including whether it is present and its tag, on a Juniper switch?
Select an answer first - 17
Which command verifies that the switch has a route to the subnet of VLAN 20, indicating inter-VLAN routing is configured?
Select an answer first - 18
A user in VLAN 20 cannot communicate with a server in VLAN 30. Both VLANs are configured on the same switch, and the interfaces are assigned correctly. The administrator checks the routing table and sees routes for both VLANs. What should the administrator check next to isolate the issue?
Select an answer first - 19
A network administrator is configuring a new access switch for a branch office. The switch must carry user traffic for VLAN 100 (data) and VLAN 200 (voice) to the distribution switch. The administrator creates both VLANs on the access switch and assigns the uplink port to both VLANs. However, the distribution switch is not receiving any traffic from the access switch for either VLAN. What should the administrator do to resolve this issue?
Select an answer first
Finished these 4 questions?
Review the revealed explanations, or continue through the curriculum.
No more pagesBack to JN0-352
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.