Juniper NetworksCertified Associate, Data Center
Domain 2Objective 6
VLAN Configuration, Monitoring, Troubleshooting JN0-281 Practice Questions (Page 2)
Part of the Layer 2 Switching and VLANs domain, which makes up ~21% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–13 in this domain), expect 1–2 from this objective — we provide 9 practice questions to prepare you well beyond it. (estimate)
9questions here
2free pages
3concepts
Questions 6–9
- 6
A host is connected to interface ge-0/0/5 and cannot reach other devices in VLAN 300. The interface is configured as an access port in VLAN 300. Which configuration error is most likely causing the issue?
Select an answer first - 7
Which configuration snippet correctly creates VLAN 100 with the name 'Engineering' on a Juniper EX switch?
Select an answer first - 8
A Juniper switch is configured with VLAN 800 and an interface ge-0/0/4 is assigned to it. The administrator notices that the interface is operationally up but is not forwarding traffic. The 'show vlans' command shows VLAN 800 is up. What is the most likely cause of the interface not forwarding traffic?
Select an answer first - 9
Which command shows the operational status of a specific interface, including its VLAN membership and link state?
Select an answer first
Finished these 4 questions?
Review the revealed explanations, or continue through the curriculum.
No more pagesBack to JN0-281
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-281” is a trademark of its owner, used for identification only.