When replacing a failed member switch in a Virtual Chassis, what should be done to minimize disruption?

Assign a new member ID to the replacement switch and connect it without removing the failed switch from the configuration

Power off the entire Virtual Chassis, replace the failed switch, and power it back on

Remove the failed switch from the Virtual Chassis configuration, replace the hardware, and then re-add the new switch with the same member ID

Replace the failed switch with a different model that has more ports

What is the purpose of assigning a member ID to a switch when configuring a Virtual Chassis?

To uniquely identify each switch within the Virtual Chassis

To enable the switch to connect to the internet

To determine the physical location of the switch in the rack

To set the switch's IP address for management

Which benefit does Virtual Chassis provide for data center network operations?

It guarantees zero packet loss during any link failure

It automatically upgrades all switches to the latest Junos OS version without user intervention

It allows all member switches to be managed through a single IP address

It eliminates the need for any physical cabling between switches

What is the primary purpose of Juniper Virtual Chassis technology in data center switches?

To enable switches from different vendors to interoperate as a single device

To increase the number of physical ports on a single switch without additional cabling

To provide a dedicated backup power source for each switch in a stack

To interconnect multiple switches into a single logical device that is managed and operated as one switch

Juniper NetworksCertified Associate, Data Center

Domain 5Objective 4

Virtual Chassis JN0-281 Practice Questions (Page 3)

Part of the High Availability domain, which makes up ~21% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~7–13 in this domain), expect 1–3 from this objective — we provide 19 practice questions to prepare you well beyond it. (estimate)

19questions here

4free pages

6concepts

Questions 11–15

11foundation · easy
In a Juniper Virtual Chassis, which role is responsible for managing the control plane of the entire Virtual Chassis?
Select an answer first
12foundation · easy
When replacing a failed member switch in a Virtual Chassis, what should be done to minimize disruption?
Select an answer first
13foundation · easy
What is the purpose of assigning a member ID to a switch when configuring a Virtual Chassis?
Select an answer first
14foundation · easy
Which benefit does Virtual Chassis provide for data center network operations?
Select an answer first
15foundation · easy
What is the primary purpose of Juniper Virtual Chassis technology in data center switches?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-281

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-281” is a trademark of its owner, used for identification only.