Juniper Mist vBLE Concepts (Asset Visibility, vBLE Engagement) JN0-253 Practice Questions (Page 8)

Questions 36–36

1. 36expert · hard

   A warehouse has a high racking system with metal shelves. The administrator has deployed Mist APs with BLE and calibrated the system. Asset tags on the lower shelves are located accurately, but tags on the upper shelves are often shown on the wrong aisle. What is the most likely reason for this discrepancy, and what is the best corrective action?

   • AThe tags on the upper shelves have a lower battery level; the administrator should replace the batteries.
   • BThe tags on the upper shelves are using a different advertisement interval; the administrator should standardize the interval.
   • CThe calibration was performed at ground level; the administrator should re-calibrate using a 3D model of the warehouse.
   • DThe upper shelves are causing multipath reflections that confuse the location engine; the administrator should add more APs at a higher elevation to improve signal reception.
   Reveal Solution Discussion Select an answer first