Which input is essential for creating an accurate RF model of a building?

The building's floor plan and construction materials

The number of users in the building

A hospital is designing a WLAN for its emergency department. The department requires high availability because clinicians rely on wireless devices for patient care. The design team wants to ensure that if an AP fails, there is no loss of connectivity. What is the best design approach?

Disable the 2.4 GHz band to reduce interference

Use a single high-power AP for the entire department

Design overlapping coverage from multiple APs

A small office is designing a WLAN with multiple APs. The design team is concerned about co-channel contention because they have a limited number of non-overlapping channels. Which design strategy is most effective in reducing co-channel contention?

Increase the transmit power of APs to improve signal strength

Place APs closer together to ensure strong signals

Use only 2.4 GHz band to have more channels

Reduce the transmit power of APs to shrink cell sizes

Juniper NetworksCertified Associate, Design

Domain 4Objective 2

WLAN Design JN0-1103 Practice Questions (Page 5)

Part of the Campus and Branch LAN Design domain, which makes up ~7% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~2–4 in this domain), expect 1–2 from this objective — we provide 32 practice questions to prepare you well beyond it. (estimate)

32questions here

7free pages

8concepts

Questions 21–25

21foundation · easy
Which input is essential for creating an accurate RF model of a building?
Select an answer first
22application · medium
A university is designing a WLAN for a new library building. The design calls for access points (APs) connected to edge switches, which are then connected to a centralized controller. The library requires high availability for the WLAN. Which device is primarily responsible for coordinating radio parameters and enforcing roaming policies across the APs?
Select an answer first
23application · medium
A hospital is designing a WLAN for its emergency department. The department requires high availability because clinicians rely on wireless devices for patient care. The design team wants to ensure that if an AP fails, there is no loss of connectivity. What is the best design approach?
Select an answer first
24foundation · easy
In the WLAN design process, which phase immediately follows the requirements-gathering phase?
Select an answer first
25application · medium
A small office is designing a WLAN with multiple APs. The design team is concerned about co-channel contention because they have a limited number of non-overlapping channels. Which design strategy is most effective in reducing co-channel contention?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-1103

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-1103” is a trademark of its owner, used for identification only.

WLAN Design JN0-1103 Practice Questions (Page 5)

Questions 21–25

Which input is essential for creating an accurate RF model of a building?

A hospital is designing a WLAN for its emergency department. The department requires high availability because clinicians rely on wireless devices for patient care. The design team wants to ensure that if an AP fails, there is no loss of connectivity. What is the best design approach?

In the WLAN design process, which phase immediately follows the requirements-gathering phase?

A small office is designing a WLAN with multiple APs. The design team is concerned about co-channel contention because they have a limited number of non-overlapping channels. Which design strategy is most effective in reducing co-channel contention?

Keep studying — Campus and Branch LAN Design