Which WLAN design factor is most critical for accurate real-time location services?

AP density and signal reception from multiple APs

Placement of APs in a central location only

When would a directional antenna be preferred over an omnidirectional antenna in a WLAN design?

When providing coverage down a long hallway

When minimizing the number of APs in a small room

When maximizing coverage in all directions from a central point

When covering a large open office area

In a secondary coverage design, what is a key consideration for access point placement?

Using only directional antennas to focus signals

Placing APs as far apart as possible to avoid overlap

Placing APs only in high-traffic areas

Ensuring sufficient overlap between adjacent AP cells

A hotel is designing a WLAN for its conference center. The center has multiple meeting rooms and a large ballroom. The hotel wants to ensure that if an AP fails, guests in the ballroom can still connect to the network. What is the best way to provide this redundancy?

Deploy APs with overlapping coverage in the ballroom

Place APs only at the entrance of the ballroom

Disable the 5 GHz band to reduce interference

Use a single high-power AP for the entire ballroom

Which of the following is a technical requirement that directly influences WLAN capacity planning?

Number of connected devices per access point

Juniper NetworksCertified Associate, Design

Domain 4Objective 2

WLAN Design JN0-1103 Practice Questions (Page 3)

Part of the Campus and Branch LAN Design domain, which makes up ~7% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~2–4 in this domain), expect 1–2 from this objective — we provide 32 practice questions to prepare you well beyond it. (estimate)

32questions here

7free pages

8concepts

Questions 11–15

11foundation · easy
Which WLAN design factor is most critical for accurate real-time location services?
Select an answer first
12foundation · easy
When would a directional antenna be preferred over an omnidirectional antenna in a WLAN design?
Select an answer first
13foundation · easy
In a secondary coverage design, what is a key consideration for access point placement?
Select an answer first
14application · medium
A hotel is designing a WLAN for its conference center. The center has multiple meeting rooms and a large ballroom. The hotel wants to ensure that if an AP fails, guests in the ballroom can still connect to the network. What is the best way to provide this redundancy?
Select an answer first
15foundation · easy
Which of the following is a technical requirement that directly influences WLAN capacity planning?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-1103

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-1103” is a trademark of its owner, used for identification only.