Top-Down Networks JN0-1103 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   What is the purpose of building a prototype during the design validation phase?

   • ATo select the cheapest hardware available
   • BTo replace the need for documentation
   • CTo test the design against requirements before full deployment
   • DTo finalize the business requirements
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   A startup is designing its first office network. The company has a limited budget but expects rapid growth. The design team must choose between a simple flat network and a hierarchical design. What is the most important technical requirement to consider?

   • AThe ability to support legacy token ring technology
   • BScalability to accommodate future growth
   • CThe need for a dedicated WAN optimization appliance
   • DThe preference for a single-vendor solution
   Reveal Solution Discussion Select an answer first
4. 8expert · hard

   A university is implementing a new network. The logical design specifies a three-tier architecture with redundant links. The physical design must select cabling and switches. The campus has existing fiber runs between buildings, but the building backbones are Cat5e. The design team must decide whether to upgrade the building backbones to fiber. What is the most important consideration?

   • AThe cost of fiber versus copper
   • BThe brand of the switches
   • CThe required bandwidth and distance between switches
   • DThe color of the fiber patch cables
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   A company has implemented a new network design. After a few weeks, users report slow performance during peak hours. The design team suspects that the core switch is the bottleneck. What is the most appropriate action to optimize the design?

   • AIncrease the number of VLANs to reduce broadcast traffic.
   • BImmediately replace the core switch with a higher-end model.
   • CDisable all non-essential features on the core switch.
   • DAnalyze traffic patterns and adjust the design to balance load across links.
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   Which of the following is a technical constraint that could limit the design of a network upgrade?

   • AThe design should use a hierarchical topology
   • BThe company wants to expand into new markets
   • CThe network must support VoIP
   • DThe existing cabling is only Cat 5e
   Reveal Solution Discussion Select an answer first