An administrator needs to create a firewall filter term that matches ICMP echo requests (ping) from any source. Which match condition correctly identifies this traffic?

from { protocol tcp; destination-port 7; }

from { protocol icmp; icmp-type echo-request; }

from { protocol udp; destination-port 7; }

An administrator is configuring a firewall filter with multiple terms. The first term is designed to match and count traffic from a specific source, but the administrator does not want to take any action on this traffic yet. The traffic should continue to be evaluated by the subsequent terms. Which action should be configured in the 'then' statement of the first term?

then count match-count; next-term;

What does the 'next-term' action do in a Junos firewall filter?

Sends an ICMP unreachable message to the sender

Moves to the next term in the filter and continues evaluation

Accepts the packet and stops evaluating further terms

Stops evaluating the filter and drops the packet

What is the primary purpose of a firewall filter in Junos?

To route packets between different autonomous systems

To encrypt traffic between two Junos devices

To translate private IP addresses to public IP addresses

To inspect and control packets based on defined match conditions and actions

Juniper NetworksCertified Associate, Junos

Domain 7Objective 6

Firewall Filters JN0-105 Practice Questions (Page 2)

Part of the Routing Policy and Firewall Filters domain, which makes up ~11% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–1 from this objective — we provide 16 practice questions to prepare you well beyond it. (estimate)

16questions here

4free pages

6concepts

Questions 6–10

6application · medium
An administrator needs to create a firewall filter term that matches ICMP echo requests (ping) from any source. Which match condition correctly identifies this traffic?
Select an answer first
7application · medium
An administrator is configuring a firewall filter with multiple terms. The first term is designed to match and count traffic from a specific source, but the administrator does not want to take any action on this traffic yet. The traffic should continue to be evaluated by the subsequent terms. Which action should be configured in the 'then' statement of the first term?
Select an answer first
8foundation · easy
What does the 'next-term' action do in a Junos firewall filter?
Select an answer first
9foundation · easy
Which firewall filter action sends a TCP RST or ICMP unreachable message back to the sender?
Select an answer first
10foundation · easy
What is the primary purpose of a firewall filter in Junos?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-105

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-105” is a trademark of its owner, used for identification only.

Firewall Filters JN0-105 Practice Questions (Page 2)

Questions 6–10

An administrator needs to create a firewall filter term that matches ICMP echo requests (ping) from any source. Which match condition correctly identifies this traffic?

What does the 'next-term' action do in a Junos firewall filter?

Which firewall filter action sends a TCP RST or ICMP unreachable message back to the sender?

What is the primary purpose of a firewall filter in Junos?

Keep studying — Routing Policy and Firewall Filters