A FortiGate is receiving a large number of routes from a BGP peer, but the administrator wants to accept only routes from a specific set of ASes. Which method should be used?

Use the neighbor's remote-as to filter routes.

Apply an AS path filter that permits only the desired AS numbers.

Set a route map that modifies the local preference.

Apply a prefix list that permits only the desired prefixes.

A FortiGate is configured to peer with a service provider router. The session is in the Established state, but the FortiGate is not receiving any routes. The administrator has verified that the neighbor is configured correctly. What is the most likely cause?

The FortiGate's BGP table is full.

The service provider is not advertising any routes to the FortiGate.

The MD5 authentication password is incorrect.

FortinetNSE 7 - Enterprise Firewall Administrator

Domain 4Objective 2

Implement BGP to Route Enterprise Traffic NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR Practice Questions (Page 2)

Part of the Routing domain, which makes up ~13% of our current practice bank. Fortinet does not publish an official question count, but from its 70-minute exam (~30–45 total, ~4–6 in this domain), expect 2–3 from this objective — we provide 23 practice questions to prepare you well beyond it. (estimate)

23questions here

5free pages

6concepts

Questions 6–10

6expert · hard
A FortiGate is receiving a large number of routes from a BGP peer, but the administrator wants to accept only routes from a specific set of ASes. Which method should be used?
Select an answer first
7foundation · easy
Which BGP neighbor type is used when two routers are in different autonomous systems?
Select an answer first
8expert · hard
A FortiGate is configured to peer with a service provider router. The session is in the Established state, but the FortiGate is not receiving any routes. The administrator has verified that the neighbor is configured correctly. What is the most likely cause?
Select an answer first
9foundation · easy
Which BGP attribute is used to influence the best path selection by indicating a preferred path to an external AS, but is only considered after the AS path length?
Select an answer first
10foundation · easy
Which BGP state indicates that the router is actively trying to establish a TCP connection with a neighbor?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Fortinet. “NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR” is a trademark of its owner, used for identification only.

Implement BGP to Route Enterprise Traffic NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR Practice Questions (Page 2)

Questions 6–10

A FortiGate is receiving a large number of routes from a BGP peer, but the administrator wants to accept only routes from a specific set of ASes. Which method should be used?

Which BGP neighbor type is used when two routers are in different autonomous systems?

A FortiGate is configured to peer with a service provider router. The session is in the Established state, but the FortiGate is not receiving any routes. The administrator has verified that the neighbor is configured correctly. What is the most likely cause?

Which BGP attribute is used to influence the best path selection by indicating a preferred path to an external AS, but is only considered after the AS path length?

Which BGP state indicates that the router is actively trying to establish a TCP connection with a neighbor?

Keep studying — Routing