Deploy and Configure FortiSwitch in Multi-Tenancy Environment NSE5-FORTISWITCH-ADMINISTRATOR Practice Questions (Page 3)

Questions 11–12

1. 11application · medium

   An MSP is deploying a FortiSwitch for a new customer. The customer has two business units that need to be on separate subnets and must not see each other's broadcast traffic. The FortiSwitch is managed by a FortiGate that has two VDOMs. The MSP wants to use a single physical FortiSwitch to support both business units. What is the correct approach for the switch configuration?

   • AConfigure the FortiSwitch with a single VLAN and use the FortiGate's VDOMs to create separate subnets.
   • BDeploy a separate FortiSwitch for each business unit to ensure isolation.
   • CCreate two VLANs on the FortiSwitch, one for each business unit, and configure the uplink to the FortiGate as a trunk carrying both VLANs.
   • DUse the FortiSwitch's VDOM feature to create a separate virtual switch for each business unit.
   Reveal Solution Discussion Select an answer first
2. 12foundation · easy

   When configuring VLANs on a FortiSwitch for tenant segmentation, what must be done to ensure that a tenant's VLAN traffic is carried to an upstream router for inter-VLAN routing?

   • AConfigure the VLAN as a tagged member on the trunk port connecting to the router
   • BEnable the VLAN on the switch's management interface
   • CSet the VLAN as the native VLAN on the access port connected to the router
   • DAssign the VLAN an IP address on the switch to enable routing
   Reveal Solution Discussion Select an answer first