Deploy and Configure FortiSwitch in Multi-Tenancy Environment NSE5-FORTISWITCH-ADMINISTRATOR Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   When deploying FortiSwitch in a multi-tenant environment, which step is required to enable VDOM support on the switch?

   • AConnect the switch to a FortiGate firewall that has VDOMs enabled
   • BAssign each tenant a unique management IP address on the same VLAN
   • CCreate a separate VLAN for each tenant before enabling VDOMs
   • DEnable VDOM mode in the switch's global configuration
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   An administrator is deploying a FortiSwitch for a managed security service provider (MSSP). The MSSP has multiple customers, and each customer's traffic must be isolated. The FortiSwitch is managed by a FortiGate. What is the primary benefit of using VDOMs on the FortiGate in this multi-tenant FortiSwitch deployment?

   • AVDOMs allow the FortiSwitch to be split into multiple virtual switches, one for each customer.
   • BVDOMs are required to enable trunking on the FortiSwitch uplink.
   • CVDOMs provide separate routing tables and firewall policies for each customer, allowing for independent management and security controls.
   • DVDOMs automatically create separate VLANs on the FortiSwitch for each customer.
   Reveal Solution Discussion Select an answer first
4. 8application · easy

   A network administrator is configuring a FortiSwitch for a multi-tenant office building. Each floor is a separate tenant. The administrator wants to ensure that a device on the first floor cannot communicate with a device on the second floor at Layer 2. The FortiSwitch is managed by a FortiGate. What is the most efficient way to achieve this?

   • AConfigure the FortiSwitch to block all traffic between its ports.
   • BUse a separate FortiSwitch for each floor.
   • CEnable DHCP snooping to prevent unauthorized devices from communicating.
   • DAssign each floor to a different VLAN on the FortiSwitch.
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   An administrator is deploying a FortiSwitch for a multi-tenant environment. The FortiSwitch is managed by a FortiGate. The administrator needs to configure the FortiSwitch so that each tenant's traffic is isolated. What is the role of the FortiGate in this deployment?

   • AThe FortiGate is only used for management and does not handle tenant traffic.
   • BThe FortiGate replaces the need for VLANs on the FortiSwitch.
   • CThe FortiGate provides Layer 3 routing and security policy enforcement between the tenants' VLANs.
   • DThe FortiGate is responsible for creating the VLANs on the FortiSwitch.
   Reveal Solution Discussion Select an answer first
6. 10application · easy

   A network administrator is configuring a FortiSwitch for a multi-tenant building. Each tenant has an office with a few computers. The administrator wants to ensure that a device in Tenant A's office cannot send a broadcast frame that is received by a device in Tenant B's office. The FortiSwitch is managed by a FortiGate. Which configuration on the FortiSwitch will accomplish this?

   • AConfigure port isolation on each tenant's ports.
   • BSet the FortiSwitch to 'secure' mode to automatically isolate all ports.
   • CEnable storm control on all ports to limit broadcast traffic.
   • DAssign each tenant's ports to a unique VLAN and do not route between the VLANs on the switch.
   Reveal Solution Discussion Select an answer first