A FortiSwitch port with an SFP+ transceiver is not linking up. The administrator has verified that the transceiver is recognized by the switch and the cable is connected. What should the administrator check next to isolate the issue?

The VLAN configuration on the port.

The MAC address table on the switch.

The port's administrative status.

The optical signal strength and the transceiver's diagnostic monitoring data.

An administrator is troubleshooting a link that is flapping on a FortiSwitch SFP+ port. The administrator has checked the transceiver diagnostics and found that the temperature is within range, but the receive power is fluctuating. What is the most likely cause?

The transceiver is not compatible with the switch.

A dirty or damaged fiber connector causing intermittent signal loss.

The VLAN configuration is incorrect.

The port speed is set incorrectly.

What is the primary role of an 802.1X port on a FortiSwitch?

To mirror traffic for monitoring purposes

To carry traffic for multiple VLANs

To provide network access control based on user authentication

To provide a high-speed uplink to the core switch

Which of the following is a hardware requirement for using split ports on a FortiSwitch?

A compatible QSFP+ transceiver and breakout cable

FortinetNSE 5 - FortiSwitch Administrator

Domain 1Objective 6

Configure Switch Ports, Split Port, and Available Transceivers NSE5-FORTISWITCH-ADMINISTRATOR Practice Questions (Page 2)

Part of the FortiSwitch Concepts domain, which makes up ~45% of our current practice bank.

25questions here

5free pages

9concepts

Questions 6–10

6application · medium
A FortiSwitch port with an SFP+ transceiver is not linking up. The administrator has verified that the transceiver is recognized by the switch and the cable is connected. What should the administrator check next to isolate the issue?
Select an answer first
7expert · hard
An administrator is troubleshooting a link that is flapping on a FortiSwitch SFP+ port. The administrator has checked the transceiver diagnostics and found that the temperature is within range, but the receive power is fluctuating. What is the most likely cause?
Select an answer first
8foundation · easy
What is the primary role of an 802.1X port on a FortiSwitch?
Select an answer first
9foundation · easy
Which of the following is a hardware requirement for using split ports on a FortiSwitch?
Select an answer first
10foundation · easy
What is the main benefit of configuring split ports on a FortiSwitch?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NSE5-FORTISWITCH-ADMINISTRATOR

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Fortinet. “NSE5-FORTISWITCH-ADMINISTRATOR” is a trademark of its owner, used for identification only.