Examers.io
ExamsOrganizationsHow it worksPricingHelp & FAQ
F5 logo

F5Certified Administrator, BIG-IP

Domain 2Objective 4

Identify Speed and Duplex F5CAB5 Practice Questions (Page 3)

Part of the Identify network level performance issues domain, which makes up ~19% of our current practice bank. F5 does not publish an official question count, but from its 30-minute exam (~10–20 total, ~2–4 in this domain), expect 1–1 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here
4free pages
5concepts

Questions 11–15

  1. 11application · medium

    An administrator is troubleshooting a BIG-IP that is experiencing packet loss and high latency. They have verified the speed and duplex settings on the BIG-IP and the switch, and both are set to 1 Gbps full duplex. What should the administrator do next?

    Select an answer first
  2. 12expert · hard

    An administrator is troubleshooting a BIG-IP that is experiencing high latency. The BIG-IP is connected to a switch. The BIG-IP interface is set to 1 Gbps full duplex, and the switch is set to 1 Gbps half duplex. The administrator checks the interface error counters and sees a high number of late collisions. What is the most likely cause of the high latency?

    Select an answer first
  3. 13application · medium

    A BIG-IP is connected to a switch. The administrator notices that the interface is up, but there are a high number of late collisions. The BIG-IP is set to auto-negotiate. What is the most likely duplex setting on the switch?

    Select an answer first
  4. 14application · medium

    A BIG-IP is connected to a switch that supports auto-negotiation. Both devices are set to auto-negotiate. The link comes up, but performance is lower than expected. The administrator checks the interface status and sees the link is at 1 Gbps full duplex, which is the expected speed. What is the most likely reason for the lower-than-expected performance?

    Select an answer first
  5. 15application · medium

    An administrator is configuring a BIG-IP to connect to a legacy switch that does not support auto-negotiation. The switch port is set to 100 Mbps half duplex. What should the administrator configure on the BIG-IP interface?

    Select an answer first
Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by F5. “F5CAB5” is a trademark of its owner, used for identification only.