Identify the Configured management-IP Address F5CAB4 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   Which BIG-IP command-line utility is used to configure the management IP address from the console?

   • Abigpipe
   • Btmsh
   • Cconfig
   • Difconfig
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   Which network segment does the management IP address on a BIG-IP system typically belong to?

   • AAny VLAN configured on the BIG-IP system
   • BThe same subnet as the internal self-IP
   • CA dedicated management network separate from data traffic
   • DThe same subnet as the external self-IP
   Reveal Solution Discussion Select an answer first
4. 8application · medium

   A network administrator is setting up a new BIG-IP VE in a lab. The management network uses 192.168.10.0/24, and the administrator needs to assign the management IP 192.168.10.50/24 to the system. The administrator is currently at the console and has not yet configured any network settings. Which command should the administrator use to set this management IP?

   • Atmsh modify sys management-ip 192.168.10.50/24
   • Bconfig network 192.168.10.50/24
   • Ctmsh create sys management-ip 192.168.10.50/24
   • Dip addr add 192.168.10.50/24 dev mgmt
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   In the BIG-IP Configuration utility, where can an administrator verify the currently configured management IP address?

   • AOn the Network → Management IP screen
   • BOn the Device Management → Devices screen
   • COn the Local Traffic → Virtual Servers screen
   • DOn the System → Platform screen
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   A company has a BIG-IP device with a management IP of 10.10.10.5 and a self-IP of 192.168.1.1. An administrator wants to access the Configuration utility for administrative tasks. The administrator is currently on a workstation that can reach the 192.168.1.0/24 network but cannot reach the 10.10.10.0/24 network. Which IP address should the administrator use to access the Configuration utility?

   • AThe default gateway of the BIG-IP
   • B10.10.10.5
   • C192.168.1.1
   • DThe MAC address of the management interface
   Reveal Solution Discussion Select an answer first