An administrator sees the LCD message "Fan 2 Failure" on a BIG-IP appliance. What does this message indicate about the device status?

The device is rebooting due to a software update

The device has detected a failed cooling fan and may be at risk of overheating

The device has lost network connectivity

The device is operating normally with no issues

An administrator notices the LCD panel of a BIG-IP device displaying 'ACTIVE' with the message 'Failover: Unit is forced offline'. The device is currently handling production traffic. What is the most appropriate initial action to take?

Ignore the message because the device is active and processing traffic normally.

Replace the hardware because the LCD message indicates a hardware failure.

Check the failover configuration to see why the unit was forced offline, and re-enable failover if appropriate.

Immediately reboot the device to clear the message and restore normal operation.

The LCD panel on a BIG-IP device displays a warning about high internal temperature. What is the most appropriate initial action for the administrator to take?

Check the ambient temperature, airflow, and cooling fans, and take corrective action if needed

Immediately power off the device to prevent damage

Ignore the warning if the device is still processing traffic

Restart the BIG-IP software to reset the temperature sensor

An administrator sees a warning message on the LCD panel of a BIG-IP device indicating a fan failure. What is the most appropriate initial action to take?

Reboot the device to clear the warning

Ignore the message and continue normal operations

Reconfigure the network settings to bypass the fan

Check the device's cooling and plan for hardware replacement or service

F5Certified Administrator, BIG-IP

Domain 3Objective 1

Interpret the LCD Panel Warning Messages F5CAB4 Practice Questions (Page 1)

Part of the Identify and report current device status domain, which makes up ~12% of our current practice bank. F5 does not publish an official question count, but from its 30-minute exam (~10–20 total, ~1–2 in this domain), expect 1–1 from this objective — we provide 6 practice questions to prepare you well beyond it. (estimate)

6questions here

2free pages

3concepts

Questions 1–5

1foundation · easy
Which type of LCD panel message on a BIG-IP device indicates a condition that requires attention but does not prevent the system from continuing to operate?
Select an answer first
2foundation · easy
An administrator sees the LCD message "Fan 2 Failure" on a BIG-IP appliance. What does this message indicate about the device status?
Select an answer first
3application · medium
An administrator notices the LCD panel of a BIG-IP device displaying 'ACTIVE' with the message 'Failover: Unit is forced offline'. The device is currently handling production traffic. What is the most appropriate initial action to take?
Select an answer first
4foundation · easy
The LCD panel on a BIG-IP device displays a warning about high internal temperature. What is the most appropriate initial action for the administrator to take?
Select an answer first
5foundation · easy
An administrator sees a warning message on the LCD panel of a BIG-IP device indicating a fan failure. What is the most appropriate initial action to take?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to F5CAB4

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by F5. “F5CAB4” is a trademark of its owner, used for identification only.