An administrator is planning to restore a UCS file to a BIG-IP device. The administrator wants to ensure that the restore does not fail due to insufficient disk space. What should the administrator do before starting the restore?

Move the UCS file to a different directory.

Check the available disk space on the device.

Compress the UCS file to reduce its size.

Delete all existing configuration files to free up space.

After a UCS restore completes, which of the following should be verified to confirm the restore was successful?

The system's hostname and management IP address match the restored configuration.

The system's uptime is greater than 24 hours.

The system's serial number is displayed in the About section.

The system's fan speed is within normal operating range.

An administrator is restoring a UCS file to a BIG-IP device. The restore process fails, and the administrator suspects that the UCS file is corrupted. The administrator has a checksum file from the original backup. What is the best way to verify the integrity of the UCS file?

Open the UCS file in a text editor to check for readable content.

Attempt to restore the file on a different BIG-IP device.

Compare the file size of the UCS file to the expected size.

Use the 'md5sum' command to compare the checksum of the UCS file to the expected checksum.

An administrator is restoring a UCS file using the BIG-IP Configuration utility. After selecting the file and clicking 'Restore', the process fails with an error. The administrator wants to troubleshoot the issue. What is the first step the administrator should take?

Reboot the device and try again.

Delete the UCS file and re-upload it.

Check the system logs for detailed error messages.

Try restoring the file using the command line instead.

A BIG-IP Administrator is restoring a UCS file to a device that is part of an HA pair. The restore completes successfully, but the standby unit is not synchronizing with the active unit. The administrator checks the logs and sees that the standby unit has a different configuration version. What is the most likely cause?

The UCS restore on the active unit did not include the HA configuration.

The UCS restore on the active unit did not include the license, causing a mismatch.

The standby unit has a different software version than the active unit.

The standby unit was not rebooted after the restore.

F5Certified Administrator, BIG-IP

Domain 5Objective 2

Execute UCS Restore Procedure F5CAB4 Practice Questions (Page 2)

Part of the Apply procedural concepts required to create, manage, and restore a UCS archive domain, which makes up ~15% of our current practice bank. F5 does not publish an official question count, but from its 30-minute exam (~10–20 total, ~2–3 in this domain), expect 1–1 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here

4free pages

4concepts

Questions 6–10

6application · medium
An administrator is planning to restore a UCS file to a BIG-IP device. The administrator wants to ensure that the restore does not fail due to insufficient disk space. What should the administrator do before starting the restore?
Select an answer first
7foundation · easy
After a UCS restore completes, which of the following should be verified to confirm the restore was successful?
Select an answer first
8expert · hard
An administrator is restoring a UCS file to a BIG-IP device. The restore process fails, and the administrator suspects that the UCS file is corrupted. The administrator has a checksum file from the original backup. What is the best way to verify the integrity of the UCS file?
Select an answer first
9application · medium
An administrator is restoring a UCS file using the BIG-IP Configuration utility. After selecting the file and clicking 'Restore', the process fails with an error. The administrator wants to troubleshoot the issue. What is the first step the administrator should take?
Select an answer first
10expert · hard
A BIG-IP Administrator is restoring a UCS file to a device that is part of an HA pair. The restore completes successfully, but the standby unit is not synchronizing with the active unit. The administrator checks the logs and sees that the standby unit has a different configuration version. What is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to F5CAB4

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by F5. “F5CAB4” is a trademark of its owner, used for identification only.