An administrator is planning to force a BIG-IP device to offline in a high availability pair. The device is currently the active unit and is handling production traffic. The administrator wants to minimize the impact on traffic. What is the primary purpose of forcing the device offline in this scenario?

To reboot the device and restore it to its previous role in the pair.

To temporarily disable the device's network interfaces while keeping it in the failover pool.

To remove the device from the data path without triggering a failover, allowing the standby unit to take over traffic handling.

To trigger a failover to the standby unit and then perform maintenance on the active unit.

What is the impact of forcing a BIG-IP device to offline on the failover behavior of the HA pair?

The device will no longer participate in failover until it is brought back online

The device will automatically become active after a failover event

The device is removed from the failover configuration and cannot be used again

The device will continue to process traffic but will not send heartbeat messages

An administrator is using the BIG-IP Configuration utility to force a device offline in a high availability pair. The device is currently the active unit and is handling production traffic. The administrator has verified that the standby unit is healthy and in sync. After clicking 'Force to Offline', the administrator wants to confirm that the device is now offline. What is the correct way to verify the offline state in the Configuration utility?

Navigate to Statistics > Dashboard and check the device's traffic.

Navigate to Device Management > Devices and check the failover state of the device.

Navigate to System > Configuration and check the device's status.

Navigate to Network > Interfaces and check the device's interface status.

When a BIG-IP device is forced to offline in an HA pair, what happens to the traffic that was being processed by that device?

Traffic is immediately redirected to the peer device

Traffic is dropped until the device comes back online

Traffic is rerouted to the next hop in the network

Traffic is queued until the device returns

F5Certified Administrator, BIG-IP

Domain 1Objective 3

Execute Force to Offline Procedure F5CAB4 Practice Questions (Page 1)

Part of the Apply procedural concepts required to manage the state of a high availability pair domain, which makes up ~9% of our current practice bank. F5 does not publish an official question count, but from its 30-minute exam (~10–20 total, ~1–2 in this domain), expect 1–1 from this objective — we provide 17 practice questions to prepare you well beyond it. (estimate)

17questions here

4free pages

7concepts

Questions 1–5

1application · medium
An administrator is planning to force a BIG-IP device to offline in a high availability pair. The device is currently the active unit and is handling production traffic. The administrator wants to minimize the impact on traffic. What is the primary purpose of forcing the device offline in this scenario?
Select an answer first
2foundation · easy
Which command can be used to verify that a BIG-IP device is in the offline state?
Select an answer first
3foundation · easy
What is the impact of forcing a BIG-IP device to offline on the failover behavior of the HA pair?
Select an answer first
4expert · hard
An administrator is using the BIG-IP Configuration utility to force a device offline in a high availability pair. The device is currently the active unit and is handling production traffic. The administrator has verified that the standby unit is healthy and in sync. After clicking 'Force to Offline', the administrator wants to confirm that the device is now offline. What is the correct way to verify the offline state in the Configuration utility?
Select an answer first
5foundation · easy
When a BIG-IP device is forced to offline in an HA pair, what happens to the traffic that was being processed by that device?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to F5CAB4

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by F5. “F5CAB4” is a trademark of its owner, used for identification only.

Execute Force to Offline Procedure F5CAB4 Practice Questions (Page 1)

Questions 1–5

Which command can be used to verify that a BIG-IP device is in the offline state?

What is the impact of forcing a BIG-IP device to offline on the failover behavior of the HA pair?

When a BIG-IP device is forced to offline in an HA pair, what happens to the traffic that was being processed by that device?

Keep studying — Apply procedural concepts required to manage the state of a high availability pair