Objective 3.06 Explain How to Properly Add/remove Device from iQuery Mesh 302 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   Which CLI command is used to add a device to the iQuery mesh on a BIG-IP DNS system?

   • Atmsh create sys iquery device
   • Btmsh modify sys iquery add-device
   • Ctmsh add sys iquery device
   • Dtmsh modify sys dns add-device
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   After removing a device, what should be checked to ensure the remaining devices are healthy?

   • ACheck that all remaining devices show a 'Connected' status in the iQuery mesh
   • BCheck that the removed device's configuration is still in sync
   • CCheck that the removed device's IP address is still reachable
   • DCheck that the removed device's hostname is still resolvable
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   After removing a device from the iQuery mesh, what should be verified to confirm the removal was successful?

   • AThe device's virtual servers are still responding to DNS queries
   • BThe device no longer appears in the iQuery device list
   • CThe device's hostname is changed to 'removed'
   • DThe device's configuration file is deleted from the system
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   A new device fails to join the iQuery mesh. What is a common cause?

   • AThe device's management IP is not in the same subnet as the mesh devices
   • BThe device is not licensed for BIG-IP DNS
   • CThe device has too many virtual servers configured
   • DThe device's hostname is too long
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   What is the primary purpose of the iQuery mesh in a BIG-IP DNS (formerly GTM) configuration?

   • ATo provide a secure channel for synchronizing DNS zone files between BIG-IP devices
   • BTo provide a backup path for management traffic if the primary network fails
   • CTo encrypt all DNS queries between clients and the BIG-IP system
   • DTo enable communication and data synchronization between BIG-IP devices for DNS services
   Reveal Solution Discussion Select an answer first