Describe Additional Network Consideration. VXRAIL-DESIGN Practice Questions (Page 5)

Questions 21–25

1. 21foundation · easy

   In a VxRail deployment, what must be consistent across all devices in the path for jumbo frames to work correctly?

   • AThe link aggregation mode
   • BThe MTU setting
   • CThe IP subnet
   • DThe VLAN ID
   Reveal Solution Discussion Select an answer first
2. 22foundation · easy

   When designing the network for a VxRail cluster, what is a key consideration regarding bandwidth?

   • ABandwidth is not a concern because VxRail uses compression
   • BBandwidth is only important for management traffic
   • CSufficient bandwidth must be allocated for vSAN and vMotion traffic to avoid bottlenecks
   • DBandwidth is automatically optimized by the VxRail software
   Reveal Solution Discussion Select an answer first
4. 23foundation · easy

   Which component is typically connected to the management network in a VxRail deployment?

   • AVM data traffic
   • BvSAN storage traffic
   • CiDRAC (IPMI) for out-of-band management
   • DvMotion traffic
   Reveal Solution Discussion Select an answer first
5. 24application · medium

   You are planning the IP addressing for a new 4-node VxRail cluster. The management team wants to use a /24 subnet for all management traffic, including ESXi hosts, vCenter, and iDRAC. The vSAN and vMotion networks will use separate subnets. Which IP addressing consideration is most critical for this design?

   • AEach node requires a unique IP address for ESXi management, vSAN, and vMotion, but iDRAC can share the ESXi management IP.
   • BThe vSAN and vMotion subnets must be in the same IP subnet as the management network to reduce routing complexity.
   • CAll IP addresses for the cluster must be assigned statically; DHCP is not supported for any VxRail network.
   • DThe management subnet must have enough addresses for all ESXi hosts, vCenter, and iDRAC, plus addresses for the VxRail Manager and internal components.
   Reveal Solution Discussion Select an answer first
6. 25foundation · easy

   When integrating a VxRail cluster with existing infrastructure, what is a key consideration for external connectivity?

   • AConnect the uplinks directly to the internet for external access
   • BUse a single VLAN for all traffic to simplify the integration
   • CDisable STP on the uplink ports to improve performance
   • DEnsure that the uplinks support the required VLANs and bandwidth for all traffic types
   Reveal Solution Discussion Select an answer first