Perform a VxRail Initialization with a VxRail Managed vCenter Server VXRAIL-DEPLOY-V2 Practice Questions (Page 3)

Questions 11–15

1. 11application · medium

   After completing the VxRail initialization wizard, the administrator wants to confirm that the VxRail managed vCenter Server is fully functional. Which action should the administrator take?

   • ARun a network packet capture to verify traffic flow.
   • BLog in to the vCenter Server and verify that the VxRail cluster is displayed.
   • CCheck the VxRail Manager logs for any errors.
   • DReboot all hosts in the cluster to ensure they are recognized.
   Reveal Solution Discussion Select an answer first
2. 12application · medium

   A company is configuring a VxRail cluster in the initialization wizard. The administrator needs to set the cluster name to 'Prod-Cluster' and configure the vSAN storage. The wizard shows a warning that the vSAN disk group configuration is not optimal. What should the administrator do?

   • ADisable vSAN and use traditional storage instead.
   • BChange the cluster name to avoid the warning.
   • CProceed with the current configuration and address the warning after deployment.
   • DReview the disk group configuration and adjust it to meet vSAN best practices.
   Reveal Solution Discussion Select an answer first
4. 13foundation · easy

   What is a key characteristic of a VxRail managed vCenter Server?

   • AIt is deployed as a virtual appliance on the VxRail cluster.
   • BIt is provided by an external VMware Cloud Foundation instance.
   • CIt is installed on a physical server separate from the cluster.
   • DIt is a Windows-based service installed on a management VM.
   Reveal Solution Discussion Select an answer first
5. 14foundation · easy

   Which storage requirement is a prerequisite for VxRail initialization?

   • AAll nodes must have identical disk capacity and type.
   • BThe local disks on each node must be configured for vSAN use.
   • CA separate datastore must be provided for the VxRail Manager VM.
   • DAt least one shared storage array must be available for the vSAN datastore.
   Reveal Solution Discussion Select an answer first
6. 15expert · hard

   A company is deploying a VxRail cluster with 4 nodes. The administrator has the following network requirements: management VLAN 10, vSAN VLAN 20, vMotion VLAN 30. The network team has provided a /24 subnet for each VLAN. The administrator needs to configure the cluster networking in the wizard. Which IP addressing scheme should the administrator use?

   • AUse different subnets for each VLAN, with IP addresses from the corresponding /24 subnet.
   • BUse the same subnet for management, vSAN, and vMotion.
   • CUse the management subnet for vSAN and vMotion to save IP addresses.
   • DUse a single subnet for all VLANs and rely on VLAN tagging.
   Reveal Solution Discussion Select an answer first